VL53L0X datasheet(11/40 Pages) STMICROELECTRONICS

номер детали	VL53L0X

подробное описание детали	World smallest Time-of-Flight ranging and gesture detection sensor

PDF	40 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

11 / 40 page

DocID029104 Rev 1

11/40

VL53L0X

Functional description

2.3

Customer manufacturing calibration flow

Figure 6 shows the recommended calibration flow that should be applied at customer level,

at factory, once only. This flow takes into account all parameters (cover glass, temperature &

voltage) from the application.

Figure 6. Customer manufacturing calibration flow

2.3.1

SPAD and temperature calibration

In order to optimize the dynamic of the system, the reference SPADs have to be calibrated.

Reference SPAD calibration needs to be done only once during the initial manufacturing

calibration, the calibration data should then be stored on the Host.

Temperature calibration is the calibration of two parameters (VHV and phase cal) which are

temperature dependent. These two parameters are used to set the device sensitivity.

Calibration should be performed during initial manufacturing calibration, it must be

performed again when temperature varies more than 8degC compared to the initial

VL53L0X датащи(PDF) 11 Page - STMicroelectronics