TMS29LF040, TMS29VF040

524288 BY 8-BIT

FLASH MEMORIES

SMJS825D – SEPTEMBER 1995 – REVISED JUNE 1998

1

POST OFFICE BOX 1443

3.3 V

± 0.3 V – TMS29LF040

2.7 V to 3.6 V – TMS29VF040

5 V

± 10% – See TMS29F040 Data sheet

(Literature Number SMJS820)

– Any Combination of Sectors Can Be

Erased

– Any Combination of Sectors Can Be

Marked as Read-Only

Erasable Programmable Read-Only

Memory (EEPROM) Command Set

Byte-Program Operations

– Active Read...20 mA Typical

– Active Program / Erase . . . 30 mA Typical

description

The TMS29LF040 and TMS29VF040 are 524 288 by 8-bit (4 194 304-bit), low-voltage, single-supply,

programmable read-only memories that can be erased electrically and reprogrammed. These devices are

organized as eight independent 64K-byte sectors and are offered with access times between 80 ns and

150 ns.

An on-chip state machine controls the program and erase operations. The embedded-byte program and

sector / chip-erase functions are fully automatic. The command set is compatible with that of JEDEC 4M-bit

EEPROMs. A suspend / resume feature allows access to unaltered memory sectors during a sector-erase

operation. Data protection of any sector combination is accomplished using a hardware sector-protection

feature.

Device operations are selected by writing JEDEC-standard commands into the command register using

standard microprocessor-write timings. The command register acts as input to an internal state machine that

interprets the commands, controls the erase and programming operations, and outputs the status of the device,

the data stored in the device, and the device algorithm-selection code. On initial power-up operation, the device

defaults to the read mode.

The TMS29xF040 is offered in a 32-pin 8 x 14 mm thin small-outline package (DBW suffix), a 32-pin

8 x 20 mm thin small-outline package (DD suffix), and a 32-pin plastic leaded chip carrier (FM suffix) using

1.27 mm (50-mil) lead pitch.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

A[0:18]

Address Inputs

DQ[0:7]

Inputs (programming) / Outputs

E

Chip Enable

G

Output Enable

VCC

Power Supply

V

SS

Ground

W

Write Enable

PIN NOMENCLATURE

32 1 32 31

14

5

6

7

8

9

10

11

12

13

29

28

27

26

25

24

23

22

21

A14

A13

A8

A9

A11

G

A10

E

DQ7

A7

A6

A5

A4

A3

A2

A1

A0

DQ0

430

15 16 17 18 19

FM PACKAGE

( TOP VIEW )

20

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Copyright

© 1998, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.