| поискавой системы для электроныых деталей |
|
ST72321R7-Auto датащи(PDF) 25 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72321R7-Auto датащи(HTML) 25 Page - STMicroelectronics |
|
25 / 243 page ![]() ST72321xx-Auto Package pinout and pin description Doc ID 13829 Rev 1 25/243 Legend / Abbreviations for Table 3: Type: I = input O = output S = supply Input level: A = dedicated analog input In/Output level: C = CMOS 0.3VDD/0.7VDD CT = CMOS 0.3VDD/0.7VDD with input trigger Output level: HS = 20mA high sink (on N-buffer only) Port and control configuration: ● Input: float = floating wpu = weak pull-up int = interrupt(a) ana = analog ● Output: OD = open-drain(b) PP = push-pull 63 - PE2 (Flash device) I/O CT X Port E2 Caution: In Flash devices this port is always input with weak pull-up. PE2 (ROM device) X XX Port E2 Caution: In ROM devices, no weak pull-up present on this port. In LQFP44 this pin is not connected to an internal pull-up like other unbonded pins. It is recommended to configure it as output push-pull to avoid added current consumption. 64 - PE3 I/O CT X XX X Port E3 1. It is mandatory to connect all available VDD and VAREF pins to the supply voltage and all VSS and VSSA pins to ground. 2. OSC1 and OSC2 pins connect a crystal/ceramic resonator or an external source to the on-chip oscillator; see Section 6: Supply, reset and clock management and Section 19.5: Clock and timing characteristics on page 195 for more details. Table 3. Device pin description (continued) Pin No. Pin name Level Port Main function (after reset) Alternate function Input Output a. In the interrupt input column, “eiX” defines the associated external interrupt vector. If the weak pull-up column (wpu) is merged with the interrupt column (int), then the I/O configuration is pull-up interrupt input, otherwise the configuration is floating interrupt input. b. In the open-drain output column, “T” defines a true open-drain I/O (P-Buffer and protection diode to VDD are not implemented). See Section 9: I/O ports on page 70 and Section 19.8: I/O port pin characteristics on page 203 for more details. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |