LQFP100 datasheet(115/116 Pages) STMICROELECTRONICS

115 / 116 page

DocID14619 Rev 13

115/116

SPC560B40x/50x, SPC560C40x/50x

Revision history

115

18-Jan-2013

In the cover feature list, replaced “System watchdog timer” with “Software watchdog

timer”

Table 3 (SPC560B40x/50x and SPC560C40x/50x series block summary), replaced

“System watchdog timer” with “Software watchdog timer” and specified AUTOSAR

(Automotive Open System Architecture)

Table 6 (Functional port pin descriptions), replaced VDD with VDD_HV

Figure 9 (Voltage regulator capacitance connection), updated pin name apperence

Renamed Figure 10 (VDD_HV and VDD_BV maximum slope) (was “VDD and VDD_BV

maximum slope”) and replaced VDD_HV(MIN) with VPORH(MAX)

Renamed Figure 11 (VDD_HV and VDD_BV supply constraints during STANDBY mode

exit) (was “VDD and VDD_BV supply constraints during STANDBY mode exit”)

Table 13 (Recommended operating conditions (3.3 V)), added minimum value of TVDD

and footnote about it.

Table 14 (Recommended operating conditions (5.0 V)), added minimum value of TVDD

and footnote about it.

Section 3.17.1, Voltage regulator electrical characteristics:



replaced “slew rate of VDD/VDD_BV” with “slew rate of both VDD_HV and VDD_BV”

replaced “When STANDBY mode is used, further constraints apply to the

VDD/VDD_BV in order to guarantee correct regulator functionality during STANDBY

exit.” with “When STANDBY mode is used, further constraints are applied to the

both VDD_HV and VDD_BV in order to guarantee correct regulator function during

STANDBY exit.”

Table 28 (Power consumption on VDD_BV and VDD_HV), updated footnotes of

IDDMAX and IDDRUN stating that both currents are drawn only from the VDD_BV pin.

Table 32 (Flash memory power supply DC electrical characteristics), in the paremeter

column replaced VDD_BV and VDD_HV respectively with VDD_BV and VDD_HV.

Table 46 (On-chip peripherals current consumption), in the paremeter column

replaced VDD_BV, VDD_HV and VDD_HV_ADC respectively with VDD_BV, VDD_HV

and VDD_HV_ADC

Updated Section 3.26.2, Input impedance and ADC accuracy

Table 47 (DSPI characteristics), modified symbol for tPCSC and tPASC

18-Sep-2013

Updated Disclaimer.

03-Feb-2015

In Table 2: SPC560B40x/50x and SPC560C40x/50x device comparison:

– changed the MPC5604BxLH entry for CAN (FlexCAN) from 37 to 26.

– updated tablenote 7.

In Table 14: Recommended operating conditions (5.0 V), updated tablenote 5 to: “1

µF (electrolithic/tantalum) + 47 nF (ceramic) capacitance needs to be provided

between VDD_ADC/VSS_ADC pair. Another ceramic cap of 10nF with low inductance

package can be added”.

In Section 3.17.2: Low voltage detector electrical characteristics, added a note on

LVHVD5 detector.

In Section 5: Ordering information, added a note: “Not all options are available on all

devices”.

Table 55. Document revision history (continued)

Date

Revision

Changes

LQFP100 датащи(PDF) 115 Page - STMicroelectronics

LQFP100 датащи(HTML) 115 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL