поискавой системы для электроныых деталей
  Russian  ▼
ALLDATASHEETRU.COM

X  

L99MM70XP датащи(PDF) 29 Page - STMicroelectronics

номер детали L99MM70XP
подробное описание детали  INH input for external CAN transceiver
PDF  68 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
производитель  STMICROELECTRONICS [STMicroelectronics]
домашняя страница  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

L99MM70XP датащи(HTML) 29 Page - STMicroelectronics

Back Button L99MM70XP Datasheet HTML 25Page - STMicroelectronics L99MM70XP Datasheet HTML 26Page - STMicroelectronics L99MM70XP Datasheet HTML 27Page - STMicroelectronics L99MM70XP Datasheet HTML 28Page - STMicroelectronics L99MM70XP Datasheet HTML 29Page - STMicroelectronics L99MM70XP Datasheet HTML 30Page - STMicroelectronics L99MM70XP Datasheet HTML 31Page - STMicroelectronics L99MM70XP Datasheet HTML 32Page - STMicroelectronics L99MM70XP Datasheet HTML 33Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 29 / 68 page
background image
L99MM70XP
Protection and diagnosis
Doc ID 022637 Rev 2
29/68
If the output current exceeds the current shutdown threshold the output transistor is turned
off and the corresponding diagnosis bit of the output is latched. The status can be read and
cleared from SPI. If the overcurrent recovery mode is set for this output, the output is
switched on again in order to provide a soft start function (see Section 3.10.5:
Programmable soft start function) and the status bit is cleared automatically. Otherwise the
output stays off until the status bit is cleared.
The outputs are automatically switched off in case of passive mode, VS undervoltage, VS
overvoltage, thermal shutdown (TSD1 and TSD2) or stuck at 1/0 condition at DI.
4.5
High-side driver outputs
The device provides a total of 4 high-side outputs OUT6,7,8,9 to drive LED or defroster.
The high-side outputs are protected against
●
Overvoltage and undervoltage (can be masked by SPI)
●
Overload (short circuit)
●
Overtemperature with pre warning
If the output current exceeds the current shutdown threshold the output transistor is turned
off and the corresponding diagnosis bit of the output is latched. The status can be read and
cleared from SPI. If the overcurrent recovery mode is set for this output, the output is
switched on again in order to provide a soft start function (see Section 3.10.5:
Programmable soft start function) and the status bit is cleared automatically. Otherwise the
output stays off until the status bit is cleared.
The outputs are automatically switched off in case of passive mode, VS undervoltage, VS
overvoltage, thermal shutdown (TSD1 and TSD2) or stuck at 1/0 condition at DI.
Note:
Loss of ground or ground shift with externally grounded loads: ESD structures are
configured for nominal currents only. If external loads are connected to different grounds, the
current load must be limited to this nominal current.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68


датащи скачать

Go To PDF Page


ссылки URL



Вашему бизинису помогли Аллдатащит?  [ DONATE ] 

Что такое Аллдатащит   |   реклама   |   контакт   |   Конфиденциальность   |   Ссылка на техническое описание    |   обмен ссыками   |   поиск по производителю
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com