| поискавой системы для электроныых деталей |
|
PC87364-XXX/VLA датащи(PDF) 66 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC87364-XXX/VLA датащи(HTML) 66 Page - National Semiconductor (TI) |
|
66 / 180 page ![]() 2.0 Device Architecture and Configuration (Continued) 66 www.national.com 2.16 GENERAL-PURPOSE INPUT/OUTPUT (GPIO) PORTS CONFIGURATION 2.16.1 General Description The GPIO functional block includes 39 pins, arranged in four 8-bit ports (ports 0, 1, 2 and 4) and one 7-bit port (port 3). All pins in ports 0 and 4 are I/O, and have full event detection capability, enabling them to trigger the assertion of IRQ, SMI and PWUREQ signals. With the exception of bit 5 which is output only, port 1 pins are also I/O with full event detection capability. Pins in ports 2 and 3 are I/O, with the exception of bits 6 and 7 of port 3 which are output only, but none of them has event detection capability. The sixteen runtime registers associated with the five ports are arranged in the GPIO address space as shown in Table 27. The GPIO base address is 16-byte aligned. Address bits 3-0 are used to indicate the register offset. Table 27. Runtime Registers in GPIO Address Space 2.16.2 Implementation The standard GPIO port with event detection capability (such as ports 0, 1 and 4) has four runtime registers. Each pin is associated with a GPIO Pin Configuration register that includes seven configuration bits. Ports 2 and 3 are non-standard ports that do not support event detection, and therefore differ from the generic model as follows: q They each have two runtime registers for basic functionality: GPDO2/3 and GPDI2/3. Event detection registers GPEVEN2/3 and GPEVST2/3 are not available. q Only bits 3-0 are implemented in the GPIO Pin Configuration registers of ports 2 and 3. Bits 6-4, associated with the event detection functionality, are reserved. q The value of GPO36 and GPO37 is multiplied by LRESET, and therefore these signals are driven low when LRESET is active. Offset Mnemonic Register Name Port Type 00h GPDO0 GPIO Data Out 0 0 R/W 01h GPDI0 GPIO Data In 0 RO 02h GPEVEN0 GPIO Event Enable 0 R/W 03h GPEVST0 GPIO Event Status 0 R/W1C 04h GPDO1 GPIO Data Out 1 1 R/W 05h GPDI1 GPIO Data In 1 RO 06h GPEVEN1 GPIO Event Enable 1 R/W 07h GPEVST1 GPIO Event Status 1 R/W1C 08h GPDO2 Data Out 2 2 R/W 09h GPDI2 Data In 2 RO 0Ah GPDO3 Data Out 3 3 R/W 0Bh GPDI3 Data In 3 RO 0Ch GPDO4 GPIO Data Out 4 4 R/W 0Dh GPDI4 GPIO Data In 4 RO 0Eh GPEVEN4 GPIO Event Enable 4 R/W 0Fh GPEVST4 GPIO Event Status 4 R/W1C |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |