| поискавой системы для электроныых деталей |
|
WM9713 датащи(PDF) 58 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM9713 датащи(HTML) 58 Page - Wolfson Microelectronics plc |
|
58 / 111 page ![]() WM9713L Preliminary Technical Data 1 PTD, March 2004, Rev 2.2 58 DIGITAL AUDIO (SPDIF) OUTPUT The WM9713L supports the SPDIF standard. Pins 48 & 12 can be used to output the SPDIF data. Note that pins 48 & 12 can also be used as GPIO pins. The GE5 & GE8 bits (register 56h, bit 5 & bit 8) select between GPIO and SPDIF functionality for pins 48 & 12 respectively (see “GPIO and Interrupt control” section). Register 3Ah is a read/write register that controls SPDIF functionality and manages bit fields propagated as channel status (or sub-frame in the V case). With the exception of V, this register should only be written to when the SPDIF transmitter is disabled (SPDIF bit in register 2Ah is ‘0’). Once the desired values have been written to this register, the contents should be read back to ensure that the sample rate in particular is supported, then SPDIF validity bit SPCV in register 2Ah should be read to ensure the desired configuration is valid. Only then should the SPDIF enable bit in register 2Ah be set. This ensures that control and status information start up correctly at the beginning of SPDIF transmission. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION 10 SPCV 0 SPDIF validity bit (read-only) 5:4 SPSA 01 SPDIF slot assignment (ADCO = 0) 00: Slots 3, 4 01: Slots 6, 9 10: Slots 7, 8 11: Slots 10, 11 2Ah Extended Audio 2 SEN 0 SPDIF output enable 1 = enabled, 0 = disabled 15 V 0 Validity bit; ‘0’ indicates frame valid, ‘1’ indicates frame not valid 14 DRS 0 Indicates that the WM9713L does not support double rate SPDIF output (read-only) 13:12 SPSR 10 Indicates that the WM9713L only supports 48kHz sampling on the SPDIF output (read- only) 11 L 0 Generation level; programmed as required by user 10:4 CC 0000000 Category code; programmed as required by user 3 PRE 0 Pre-emphasis; ‘0’ indicates no pre-emphasis, ‘1’ indicates 50/15us pre-emphasis 2 COPY 0 Copyright; ‘0’ indicates copyright is not asserted, ‘1’ indicates copyright 1 AUDIB 0 Non-audio; ‘0’ indicates data is PCM, ‘1’ indicates non-PCM format (e.g. DD or DTS) 3Ah SPDIF Control Register 0 PRO 0 Professional; ‘0’ indicates consumer, ‘1’ indicates professional 5Ch Additional Function Control 4 ADCO 0 Source of SPDIF data 0: SPDIF data comes from SDATAOUT (pin 5), slot selected by SPSA 1: SPDIF data comes from audio ADC Table 44 SPDIF Output Control |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |