| поискавой системы для электроныых деталей |
|
LAN8740Ai-EN датащи(PDF) 9 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN8740Ai-EN датащи(HTML) 9 Page - Microchip Technology |
|
9 / 136 page ![]() 2013-2015 Microchip Technology Inc. DS00001987A-page 9 LAN8740A/LAN8740Ai 1 Receive Data 3 (MII Mode) RXD3 VO8 Bit 3 of the 4 (in MII mode) data bits that are sent by the transceiver on the receive path. Note: This signal is not used in RMII mode. PHY Address 2 Configuration Strap PHYAD2 VIS (PD) Combined with PHYAD0 and PHYAD1, this config- uration strap sets the transceiver’s SMI address. See Note 1 for more information on configuration straps. Note: Refer to Section 3.7.1, "PHYAD[2:0]: PHY Address Configuration" for addi- tional information. 1 Receive Error RXER VO8 This signal is asserted to indicate that an error was detected somewhere in the frame presently being transferred from the transceiver. This signal is also used in EEE mode as RXER when RXDV = 1, and as LPI when RXDV = 0. Note: This signal is optional in RMII mode. Receive Data 4 (MII Mode) RXD4 VO8 In Symbol Interface (5B decoding) mode, this sig- nal is the MII Receive Data 4 signal, the MSB of the received 5-bit symbol code-group. Note: Unless configured to the Symbol Inter- face mode, this pin functions as RXER. PHY Address 0 Configuration Strap PHYAD0 VIS (PD) Combined with PHYAD1 and PHYAD2, this config- uration strap sets the transceiver’s SMI address. See Note 1 for more information on configuration straps. Note: Refer to Section 3.7.1, "PHYAD[2:0]: PHY Address Configuration" for addi- tional information. 1 Receive Clock (MII Mode) RXCLK VO8 In MII mode, this pin is the receive clock output. • MII (100BASE-TX): 25 MHz • MII (10BASE-T): 2.5 MHz PHY Address 1 Configuration Strap PHYAD1 VIS (PD) Combined with PHYAD0 and PHYAD2, this config- uration strap sets the transceiver’s SMI address. See Note 1 for more information on configuration straps. Note: Refer to Section 3.7.1, "PHYAD[2:0]: PHY Address Configuration" for addi- tional information. 1 Receive Data Valid RXDV VO8 Indicates that recovered and decoded data is avail- able on the RXD pins. TABLE 2-1: MII/RMII SIGNALS (CONTINUED) Num Pins Name Symbol Buffer Type Description |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |