©2014 Silicon Storage Technology, Inc.

DS20005053B

04/14

2

4 Mbit (x16) Multi-Purpose Flash Plus

SST39VF401C / SST39VF402C / SST39LF401C / SST39LF402C

Data Sheet

Product Description

The SST39VF401C/402C and SST39LF401C/402C devices are 256K x16 CMOS Multi-Purpose Flash

Plus (MPF+) manufactured with proprietary, high performance CMOS SuperFlash technology. The

split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability

compared with alternate approaches. SST39LF401C/402C write (Program or Erase) with a 3.0-3.6V

power supply. SST39VF401C/402C write with a 2.7-3.6V power supply. These devices conform to

JEDEC standard pinouts for x16 memories.

Featuring high performance Word-Program, the SST39VF401C/402C and SST39LF401C/402C

devices provide a typical Word-Program time of 7 µsec. These devices use Toggle Bit, Data# Polling,

or the RY/BY# pin to indicate the completion of Program operation. To protect against inadvertent

write, they have on-chip hardware and Software Data Protection schemes. Designed, manufactured,

and tested for a wide spectrum of applications, these devices are offered with a guaranteed typical

endurance of 100,000 cycles. Data retention is rated at greater than 100 years.

The SST39VF401C/402C and SST39LF401C/402C devices are suited for applications that require

convenient and economical updating of program, configuration, or data memory. For all system appli-

cations, they significantly improve performance and reliability, while lowering power consumption. They

inherently use less energy during Erase and Program than alternative flash technologies. The total

energy consumed is a function of the applied voltage, current, and time of application. Since for any

given voltage range, the SuperFlash technology uses less current to program and has a shorter erase

time, the total energy consumed during any Erase or Program operation is less than alternative flash

technologies. These devices also improve flexibility while lowering the cost for program, data, and con-

figuration storage applications.

The SuperFlash technology provides fixed Erase and Program times, independent of the number of

Erase/Program cycles that have occurred. Therefore the system software or hardware does not have

to be modified or de-rated as is necessary with alternative flash technologies, whose Erase and Pro-

gram times increase with accumulated Erase/Program cycles.

To meet high density, surface mount requirements, the SST39VF401C/402C and SST39LF401C/402C

are offered in 48-lead TSOP, 48-ball TFBGA, and 48-ball WFBGA packages. See Figures 2, 3, and 4

for pin assignments.