| поискавой системы для электроныых деталей |
|
MCP3909-E/SS датащи(PDF) 23 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP3909-E/SS датащи(HTML) 23 Page - Microchip Technology |
|
23 / 44 page ![]() 2006-2012 Microchip Technology Inc. DS22025C-page 23 MCP3909 EQUATION 4-2: ACTIVE POWER HFOUT FREQUENCY OUTPUT EQUATION The constant HFC depends on the FOUT0 and FOUT1 digital settings with the Table 4-3. The detailed timings of the output pulses are described in the Timing Characteristics table (see Section 1.0 “Electrical Characteristics” and Figure 1-1). 4.8.1 MINIMAL OUTPUT FREQUENCY FOR NO-LOAD THRESHOLD The MCP3909 also includes, on each output fre- quency, a no-load threshold circuit that will eliminate any creep effects in the meter. The outputs will not show any pulse if the output frequency falls below the no-load threshold. This threshold only applies to the pulse outputs and does not gate any serial data coming from either the A/D output or the multiplier output. The minimum output frequency on FOUT0/1 and HFOUT is equal to 0.0015% of the maximum output frequency (respectively FC and HFC) for each of the F2, F1 and F0 selections (see Table 4-2 and Table 4-3); except when F2, F1, F0 = 011. In this last configuration, the no-load threshold feature is disabled. The selection of FC will determine the start-up current load. In order to respect the IEC standards requirements, the meter will have to be designed to allow start-up currents compatible with the standards by choosing the FC value matching these requirements. For additional applications infor- mation on no-load threshold, startup current and other meter design points, refer to AN994, "IEC Compliant Active Energy Meter Design Using The MCP3905/6”, (DS00994). TABLE 4-3: OUTPUT FREQUENCY CONSTANT HFC FOR HFOUT (VREF =2.4V) HFOUT Hz 8.06 V0 V1 G HFC VREF 2 ----------------------------------------------------------------- = Where: V0 = the RMS differential voltage on Channel 0 V1 = the RMS differential voltage on Channel 1 G = the PGA gain on Channel 0 (current channel) HFC = the frequency constant selected VREF = the voltage reference F2 F1 F0 HFC HFC (Hz) HFC (Hz) (MCLK = 3.58 MHz) HFOUT Frequency (Hz) with full scale AC Inputs 00 0 64 x FC MCLK/215 109.25 27.21 00 1 32 x FC MCLK/215 109.25 27.21 01 0 16 x FC MCLK/215 109.25 27.21 01 1 2048 x FC MCLK/27 27968.75 6070.12 10 0 128 x FC MCLK/216 219.51 47.42 10 1 64 x FC MCLK/216 219.51 47.42 11 0 32 x FC MCLK/216 219.51 47.42 11 1 16 x FC MCLK/216 219.51 47.42 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |