RN171 datasheet(16/30 Pages) MICROCHIP

16 / 30 page

RN171

DS70005171B-page 16

 2014-2016 Microchip Technology Inc.

4.1.2

RF EXPOSURE

All transmitters regulated by FCC must comply with RF

exposure requirements. OET Bulletin 65, Evaluating

Compliance with FCC Guidelines for Human Exposure

to Radio Frequency Electromagnetic Fields, provides

assistance in determining whether proposed or existing

transmitting facilities, operations or devices comply

with limits for human exposure to Radio Frequency

(RF) fields adopted by the Federal Communications

Commission (FCC). The bulletin offers guidelines and

suggestions for evaluating compliance.

If appropriate, compliance with exposure guidelines for

mobile and unlicensed devices can be accomplished

by the use of warning labels and by providing users

with information concerning minimum separation dis-

tances from transmitting structures and proper installa-

tion of antennas.

The following statement must be included as a CAU-

TION statement in manuals and OEM products to alert

users of FCC RF exposure compliance:

If the RN171 module is used in a portable application

(i.e., the antenna is less than 20 cm from persons

during operation), the integrator is responsible for per-

forming Specific Absorption Rate (SAR) testing in

accordance with FCC rules 2.1091.

4.1.3

APPROVED EXTERNAL ANTENNA

TYPES

To maintain modular approval in the United States,

only the antenna types that have been tested shall be

used. It is permissible to use different antenna manu-

facturers provided the same antenna type that has sim-

ilar in-band and out-of-band radiation patterns and

antenna gain (equal to or less than) is used.

Modular approval testing of the RN171 module was

performed with the antenna types listed in Table 3-1.

4.1.4

HELPFUL WEB SITES

• Federal Communications Commission (FCC):

http://www.fcc.gov

• FCC Office of Engineering and Technology (OET)

Laboratory Division Knowledge Database (KDB):

http://apps.fcc.gov/oetcf/kdb/index.cfm

4.2

Canada

The RN171 module has been certified for use in Can-

ada under Industry Canada (IC) Radio Standards

Specification (RSS) RSS-210 and RSSGen. Modular

approval permits the installation of a module in a host

device without the need to recertify the device.

4.2.1

LABELING AND USER

INFORMATION REQUIREMENTS

Labeling Requirements for the Host Device (from Sec-

tion 3.2.1, RSS-Gen, Issue 3, December 2010): The

host device shall be properly labeled to identify the

module within the host device.

The Industry Canada certification label of a module

shall be clearly visible at all times when installed in the

host device, otherwise the host device must be labeled

to display the Industry Canada certification number of

the module, preceded by the words “Contains transmit-

ter module”, or the word “Contains”, or similar wording

expressing the same meaning, as follows:

User Manual Notice for License-Exempt Radio Appara-

tus (from Section 7.1.3 RSS-Gen, Issue 3, December

2010): User manuals for license-exempt radio appara-

tus shall contain the following or equivalent notice in a

conspicuous location in the user manual or alterna-

tively on the device or both:

To satisfy FCC RF Exposure requirements for

mobile and base station transmission devices, a

separation distance of 20 cm or more should be

maintained between the antenna of this device and

persons during operation. To ensure compliance,

operation at closer than this distance is not recom-

mended.

The antenna(s) used for this transmitter must not be

co-located or operating in conjunction with any other

Contains transmitter module IC: 6514A-RN171

This device complies with Industry Canada

license-exempt RSS standard(s). Operation is sub-

ject to the following two conditions: (1) this device

may not cause interference, and (2) this device must

accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Indus-

trie Canada applicables aux appareils radio exempts

de licence. L'exploitation est autorisée aux deux con-

ditions suivantes: (1) l'appareil ne doit pas produire

de brouillage, et (2) l'utilisateur de l'appareil doit

accepter tout brouillage radioélectrique subi, même

si le brouillage est susceptible d'en compromettre le

fonctionnement.

RN171 датащи(PDF) 16 Page - Microchip Technology

RN171 датащи(HTML) 16 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

датащи скачать

ссылки URL