| поискавой системы для электроныых деталей |
|
CAP1114 датащи(PDF) 68 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
CAP1114 датащи(HTML) 68 Page - Microchip Technology |
|
68 / 102 page ![]() Multiple Channel Capacitive Touch Sensor and LED Driver Datasheet Revision 1.1 (02-04-11) 68 SMSC CAP1114 DATASHEET Bit 7 - ACC_INT_EN - Enables the device to generate extra interrupts after an accelerated slide has been detected. ‘0’ - The device will not generate extra interrupts during or after the slide has been detected. ‘1’ (default) - The device will generate extra interrupts after an accelerated slide is detected. The number of extra interrupts generated will be proportional to the speed of the accelerated slide but will not exceed the maximum number of extra interrupts as determined by the MAX_INT bits. Bits 6-4 - MAX_INT[2:0] - (default 100b) Determine the maximum number of extra interrupts that will be generated after a single slide (regardless of length). The variable “T” is the actual slide time and the parameter SLIDE_TIME is set by bits [3:2] of this register. Bits 3-2 - SLIDE_TIME[1:0] - (default 01b) - Determines how fast a slide must be to generate extra interrupts. This is the maximum slide time that will result in extra interrupts being generated. If the slide time is greater than SLIDE_TIME, no extra interrupts will be generated. Bits 1 - 0 - RPT_SCALE[1:0] - (default 01b) - Determines how much to increase the Repeat Rate based on slide speed. The slide speed is determined by counting how many sensors are touched in approximately 100msec. The Repeat Rate is then increased various amounts based on the RPT_SCALE parameter. When read in Table 6.48, the repeat rate given is the number of measurement cycles between interrupts generated. Table 6.46 MAX_INT Bit Decode MAX_INT[2:0] MAX # INTERRUPTS # INTERRUPTS FOR T < 1/2 SLIDE_TIME # INTERRUPTS FOR 1/2 < T < 3/4 SLIDE_TIME # INTERRUPTS FOR 3/4 < T < FULL SLIDE_TIME 21 0 00 0 0 0 0 0 00 1 1 1 0 0 01 0 2 2 1 0 01 1 3 3 1 0 10 0 4 4 2 1 10 1 5 5 2 1 11 0 6 6 3 1 11 1 7 7 3 1 Table 6.47 SLIDE_TIME Bit Decode SLIDE_TIME[1:0] APPROXIMATE SLIDE TIME (MSEC) 10 0 0 350 0 1 560 (default) 1 0 770 1 1 980 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |