| поискавой системы для электроныых деталей |
|
CAP1114 датащи(PDF) 61 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
CAP1114 датащи(HTML) 61 Page - Microchip Technology |
|
61 / 102 page ![]() Multiple Channel Capacitive Touch Sensor and LED Driver Datasheet SMSC CAP1114 61 Revision 1.1 (02-04-11) DATASHEET 6.24 Lid Closure Configuration Register The Lid Closure Configuration Register controls the settings for the lid closure detection circuitry. Bit 7 - LID_CLOSE - Enables the lid closure circuitry. ‘0’ (default) - The lid closure circuitry is disabled. ‘1’ The lid closure circuitry is enabled. The device will use the Lid Closure Status registers in combination with the Lid Closure Pattern register settings to determine when a Lid Closure Event is flagged. In addition, the Noise Status bits are associated with lid closure. Bit 1 - COMP_PTRN - Determines how the Lid Closure Status registers are compared against the Lid Closure Pattern registers. See Section 6.26 for details on how the Lid Closure Pattern registers are used. ‘0’ (default) - The Lid Closure Status registers are not compared directly against the Lid Closure Pattern registers. Instead, the number of bits in the Lid Closure Status registers is compared to the number of bits in the Lid Closure Pattern registers to determine whether a Lid Closure Event is flagged. ‘1’ - The Lid Closure Status registers are compared directly against the Lid Closure Pattern registers. If the bits set in the Lid Closure Pattern are also set in the Lid Status registers, a Lid Closure Event is flagged. Bit 0 - LID_ALRT - Enables an interrupt if a Lid Closure Event occurs. ‘0’ (default) - If a Lid Closure Event occurs, the ALERT pin is not asserted. ‘1’ - If a Lid Closure Event occurs, the ALERT pin will be asserted. 6.25 Lid Closure Queue Control Register The Lid Closure Queue Control Register determines the number of consecutive samples for which a single sensor output is above the Lid Closure Threshold before it is flagged. A value of 0000b is decoded as 1. 1 0 4 (default) 11 1 Table 6.34 Lid Closure Configuration Register ADDR R/W REGISTER B7 B6 B5 B4 B3 B2 B1 B0 DEFAULT 2Bh R/W Lid Closure Config LID_ CLOSE ----- COMP_ PTRN LID_ ALRT 00h Table 6.35 Lid Closure Queue Control Register ADDR R/W REGISTER B7 B6 B5 B4 B3 B2 B1 B0 DEFAULT 2Ch R/W Lid Closure Queue Control - - - - - QUEUE_L_B[2:0] 02h Table 6.33 G_MULT_T Bit Decode (continued) G_MULT_T[1:0] NUMBER OF SIMULTANEOUS TOUCHES 10 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |