Tel:+86-755-82973805

Fax: +86-755-82973550

Email:sales@hoperf.com

http://www.hoperf.com

1

I

Features



± 5% RH (max), 0–80% RH



±1 °C (max), –10 to 85 °C

(1.9 to 3.6 V)



150 µA active current



60 nA standby current

Applications

Description



Low-profile



Protection during reflow



Excludes liquids and particulates

defogging

TH06: 9.1mmx10.8 mm SMT Module

The TH06 I2C Humidity and Temperature Sensor is a monolithic CMOS IC integrating humidity and temperature

sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C Interface. The

patented use of industry-standard, low-K polymeric dielectrics for sensing humidity enables the construction of low-

power, monolithic CMOS Sensor ICs with low drift and hysteresis, and excellent long term stability.

The humidity and temperature sensors are factory-calibrated and the calibration data is stored in the on-chip non-

volatile memory. This ensures that the sensors are fully interchangeable, with no recalibration or software changes

required

The TH06 is reflow solderable. It can be used as a hardware- and software-compatible drop-in upgrade for existing

RH/ temperature sensors , featuring precision sensing over a wider range and lower power consumption. The

optional factory-installed cover offers a low profile, convenient means of protecting the sensor during assembly (e.g.,

reflow soldering) and throughout the life of the product, excluding liquids (hydrophobic/oleophobic) and particulates.

The TH06 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point,

and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms.