RF65 datasheet(24/72 Pages) ETC2

24 / 72 page

Page 24

RF65

Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com

ADVANCED COMMUNICATIONS & SENSING

DATASHEET

3.4.13. OOK Demodulator

The OOK demodulator performs a comparison of the RSSI output and a threshold value. Three different threshold modes

are available, configured through bits OokThreshType in RegOokPeak.

The recommended mode of operation is the "Peak" threshold mode, illustrated in Figure 8:

RSSI

[dBm]

„‟Peak -6dB‟‟ Threshold

„‟Floor‟‟ threshold defined by

OokFixedThresh

Noise floor of

receiver

Time

Zoom

Decay in dB as defined in

OokPeakThreshStep

Fixed 6dB difference

Period as defined in

OokPeakThreshDec

Figure 8. OOK Peak Demodulator Description

In peak threshold mode the comparison threshold level is the peak value of the RSSI, reduced by 6dB. In the absence of

an input signal, or during the reception of a logical "0", the acquired peak value is decremented by one

OokPeakThreshStep every OokPeakThreshDec period.

When the RSSI output is null for a long time (for instance after a long string of "0" received, or if no transmitter is present),

the peak threshold level will continue falling until it reaches the "Floor Threshold", programmed in OokFixedThresh.

The default settings of the OOK demodulator lead to the performance stated in the electrical specification. However, in

applications in which sudden signal drops are awaited during a reception, the three parameters should be optimized

accordingly.

3.4.13.1. Optimizing the Floor Threshold

OokFixedThresh determines the sensitivity of the OOK receiver, as it sets the comparison threshold for weak input signals

(i.e. those close to the noise floor). Significant sensitivity improvements can be generated if configured correctly.

RF65 датащи(PDF) 24 Page - List of Unclassifed Manufacturers