DocID024655 Rev 3

7/24

TN1037

Heatsink mounting information

24

The SLLIMM-nano has some visible trimmed terminations on both lateral sides of the body

to improve mechanical stress capability during the process flow, as shown in

Figure 6.

Some of these trimmed terminations are subjected to high voltage. Therefore, special

attention must be paid to avoid any direct or indirect contact with these trimmed terminations

during the testing phase. Moreover, a safe distance must be maintained between the

heatsink and the trimmed terminations. In this case, the thermal pad may play an important

role. If the pad is overhanging the package body, further insulation may be gained.

Figure 6. Heatsink force delivery onto the body of SLLIMM-nano

AM17196v1