AN2335 datasheet(22/40 Pages) STMICROELECTRONICS

22 / 40 page

Data and status registers

AN2335

22/40

Data and status registers

7.1

WHO_AM_I (0Fh)

Device identification register.

This register contains a device identifier which for LIS302DL is set to 3Bh.

7.2

STATUS_REG (27h)

Data output status register.

ZYXOR is set to one whenever a new acceleration data is produced before completing the

retrieval of the previous set. When this occurs, the content of at least one acceleration data

acceleration data (OUTX, OUTY, OUTZ) of all the active channels are read.

111

ZYXOR

ZOR

YOR

XOR

ZYXDA

ZDA

YDA

XDA

ZYXOR

X, Y and Z axes Data Overrun. Default value: 0

(0: no overrun has occurred;

1: new data has overwritten the previous one before it was read)

ZOR

Z axis Data Overrun. Default value: 0

(0: no overrun has occurred;

1: a new data for the Z-axis has overwritten the previous one)

YOR

Y axis Data Overrun. Default value: 0

(0: no overrun has occurred;

1: a new data for the Y-axis has overwritten the previous one)

XOR

X axis Data Overrun. Default value: 0

(0: no overrun has occurred;

1: a new data for the X-axis has overwritten the previous one)

ZYXDA

X, Y and Z axis new Data Available. Default value: 0

(0: a new set of data is not yet available; 1: a new set of data is available)

ZDA

Z axis new Data Available. Default value: 0

(0: a new data for the Z-axis is not yet available;

1: a new data for the Z-axis is available)

YDA

Y axis new Data Available. Default value: 0

(0: a new data for the Y-axis is not yet available;

1: a new data for the Y-axis is available)

XDA

X axis new Data Available. Default value: 0

(0: a new data for the X-axis is not yet available;

1: a new data for the X-axis is available)

AN2335 датащи(PDF) 22 Page - STMicroelectronics

AN2335 датащи(HTML) 22 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

датащи скачать

ссылки URL