| поискавой системы для электроныых деталей |
|
HDM8515P датащи(PDF) 30 Page - Hynix Semiconductor |
|
|
|||||||||||||||||||||||||||||
HDM8515P датащи(HTML) 30 Page - Hynix Semiconductor |
|
30 / 75 page ![]() 30 3.7 Clock Generation PLL An integrated VCO is locked to MxN times a reference frequency provided by a external clock. 1.Determining Output Frequency Fully programmable feedback and reference divider capability allows virtually any frequency to be generated, not just simple multiples of reference frequency. There are two status exist (1) PLL Disable mode : The PLL is bypassed and the external clock is directly connected to the Internal clock. (2) PLL Enable mode : The internal clock is connected to the generated clock of the PLL. 1.1 PLL disable mode PLL control setting is as follows TDM (Bit 7 of 0x23 register) is set to one and BYPASS (Bit 4 of 0x23 register) is set to one. 1.2 Normal Frequency mode Output frequency range is limited to 160MHz. PLL control setting is as follows: TDM (Bit 7 of 0x23 register) is set to zero, and BYPASS (Bit 4 of 0x23 register) is set to zero. At this condition, the output frequency, F(ck), is actually determined by the following equation. F(ck) = ---------------------------------------------- F(ck) : Frequency of output F(ref): Frequency of reference input Feedback divisor : M[13:0]+2 , (0x25 and 0x26 registers) Reference divisor : N[7:0]+1 , (0x27 register) 1.3 Extended Frequency mode Output frequency range is limited to 320MHz. PLL control setting is as follows TDM (Bit 7 of 0x23 register) is set to zero, and BYPASS (Bit 4 fo 0x23 register) is set to one. At this condition, the output frequency, F(ck), is actually determined by the following Equation F(ck) = -------------------------------------------------------- Pre divisor : 2 p[1:0]+1 , P is Bit 2 and 3 of 0x23 register 2. PLL Control Parameter setting Besides of M (Feedback divisor), N (Reference divisor), P (Pre divisor) , You must determine vc (VCO range control vector), lfm (Loop filter mode selector), icp (Charge pump bias current control F(ref) x (Feedback divisor) (Reference divisor) F(ref) x (Feedback divisor) x (Pre divisor) (Reference divisor) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |