Datasheet

BMM150 Geomagnetic Sensor

Page 51

BST-BMM150-DS001-01 | Revision 1.0 | April 2013

Bosch Sensortec

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to

third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.

Note: Specifications within this document are subject to change without notice.

9.4 Soldering guidelines

The moisture sensitivity level of the BMM150 sensors corresponds to JEDEC Level 1, see also:

 IPC/JEDEC J-STD-020C "Joint Industry Standard: Moisture/Reflow Sensitivity

Classification for non-hermetic Solid State Surface Mount Devices"

 IPC/JEDEC J-STD-033A "Joint Industry Standard: Handling, Packing, Shipping and Use of

Moisture/Reflow Sensitive Surface Mount Devices".

The sensor fulfils the lead-free soldering requirements of the above-mentioned IPC/JEDEC

standard, i.e. reflow soldering with a peak temperature up to 260°C.

Figure 26: Soldering profile