THS4532IPW datasheet(35/44 Pages) NSC

35 / 44 page

2 k

0.22 F

THS4532

VOUT+

40.2

VOUT±

40.2

From Analyzer

VIN+

VIN±

VOCM

100 pF

2 k

1 nF

100 pF

2.7 nF

2 k

To Analyzer

PCM4204

50m

100m

150m

200m

0.5

1.5

2.5

Time (s)

Power Down

VOUT +

VOUT −

VS = 5 V

G = 2 V/V

RF = 2 kΩ

RL = 200 Ω

G074

THS4532

www.ti.com

SLOS829 – FEBRUARY 2013

Figure 89. PD Enable Pop Performance

AUDIO ADC DRIVER PERFORMANCE: THS4532 AND PCM4204 COMBINED PERFORMANCE

To show achievable performance with a high performance audio ADC, the THS4532 is tested as the drive

amplifier for the PCM4204. The PCM4204 is a high-performance, four-channel analog-to-digital (A/D) converter

designed for professional and broadcast audio applications. The PCM4204 architecture utilizes a 1-bit delta-

sigma modulator per channel incorporating an advanced dither scheme for improved dynamic performance, and

supports PCM output data. The PCM4204 provides flexible serial port interface and many other advanced

features. Please refer to its data sheet for more information.

The PCM4204 EVM is used to test the audio performance of the THS4532 as a drive amplifier. The standard

PCM4204 EVM is provided with 4x OPA1632 fully differential amplifiers, which use the same pin out as the

THS4532. For testing, one of these amplifiers is replaced with a THS4532 device in same package (MSOP), gain

changed to 1V/V, and power supply changed to single supply +5V. Figure 90 shows the circuit. With single

supply +5V supply the output common-mode of the THS4532 defaults to +2.5V as required at the input of the

PCM4204. So the resistor connecting the VOCM input of the THS4532 to the input common-mode drive from the

PCM4204 is optional and no performance change was noted with it connected or removed. The EVM power

connections were modified by connecting positive supply inputs, +15V, +5VA and +5VD, to a +5V external power

supply (EXT +3.3 was not used) and connecting -15V and all ground inputs to ground on the external power

supply so only one external +5V supply was needed to power all devices on the EVM.

Figure 90. THS4532 and PCM4204 Test Circuit

Submit Documentation Feedback

Product Folder Links :THS4532

THS4532IPW датащи(PDF) 35 Page - National Semiconductor (TI)

THS4532IPW датащи(HTML) 35 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

датащи скачать

ссылки URL