AT6002-2AC datasheet(5/28 Pages) ATMEL

5 / 28 page

AT6000(LV) Series

In addition to the four local-bus connections, a cell receives

two inputs and p rovides two outputs to ea ch of its

North (N), South (S), East (E) and West (W) neighbors.

These inputs and outputs are divided into two classes: “A”

and “B”. There is an A input and a B input from each neigh-

boring cell and an A output and a B output driving all four

neighbors. Between cells, an A output is always connected

to an A input and a B output to a B input.

Within the cell, the four A inputs and the four B inputs enter

two separate, independently configurable multiplexers. Cell

flexibility is enhanced by allowing each multiplexer to select

also the logical constant “1”. The two multiplexer outputs

enter the two upstream AND gates.

Downstream from these two AND gates are an Exclusive-

OR (XOR) gate, a register, an AND gate, an inverter and

two four-input multiplexers producing the A and B outputs.

These multiplexers are controlled in tandem (unlike the

A and B input multiplexers) and determine the function of

the cell.

• In State 0 – corresponding to the “0” inputs of the

multiplexers – the output of the left-hand upstream AND

gate is connected to the cell’s A output, and the output of

the right-hand upstream AND gate is connected to the

cell’s B output.

• In State 1 – corresponding to the “1” inputs of the

multiplexers – the output of the left-hand upstream AND

gate is connected to the cell’s B output, the output of the

right-hand upstream AND gate is connected to the cell’s

A output.

• In State 2 – corresponding to the “2” inputs of the

multiplexers – the XOR of the outputs from the two

upstream AND gates is provided to the cell’s A output,

while the NAND of these two outputs is provided to the

cell’s B output.

• In State 3 – corresponding to the “3” inputs of the

multiplexers – the XOR function of State 2 is provided to

the D input of a D-type flip-flop, the Q output of which is

connected to the cell’s A output. Clock and

asynchronous reset signals are supplied externally as

described later. The AND of the outputs from the two

upstream AND gates is provided to the cell's B output.

Logic States

The Atmel cell implements a rich and powerful set of logic

functions, stemming from 44 logical cell states which per-

mutate into 72 physical states. Some states use both A and

B inputs. Other states are created by selecting the “1” input

on either or both of the input multiplexers.

There are 28 combinatorial primitives created from the

cell’s tristate capabilities and the 20 physical states repre-

sented in Figure 5. Five logical primitives are derived from

the physical constants shown in Figure 7. More complex

functions are created by using cells in combination.

A two-input AND feeding an XOR (Figure 8) is produced

using a single cell (Figure 9). A two-to-one multiplexer

selects the logical constant “0” and feeds it to the right-

hand AND gate. The AND gate acts as a feed-through, let-

ting the B input pass through to the XOR. The three-to-one

multiplexer on the right side selects the local-bus input,

LNS1, and passes it to the left-hand AND gate. The A and

LNS1 signals are the inputs to the AND gate. The output of

the AND gate feeds into the XOR, producing the logic state

(AlL) XOR B.

AT6002-2AC датащи(PDF) 5 Page - ATMEL Corporation

AT6002-2AC датащи(HTML) 5 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

датащи скачать

ссылки URL