64GA106 datasheet(199/330 Pages) MICROCHIP

199 / 330 page

 2010 Microchip Technology Inc.

DS39905E-page 199

PIC24FJ256GA110 FAMILY

bit 5

ADDEN:

Address Character Detect bit (bit 8 of received data = 1)

= Address Detect mode enabled. If 9-bit mode is not selected, this does not take effect.

= Address Detect mode disabled

bit 4

RIDLE:

Receiver Idle bit (read-only)

= Receiver is Idle

= Receiver is active

bit 3

PERR:

Parity Error Status bit (read-only)

= Parity error has been detected for the current character (character at the top of the receive FIFO)

= Parity error has not been detected

bit 2

FERR:

Framing Error Status bit (read-only)

= Framing error has been detected for the current character (character at the top of the receive FIFO)

= Framing error has not been detected

bit 1

OERR:

Receive Buffer Overrun Error Status bit (clear/read-only)

= Receive buffer has overflowed

= Receive buffer has not overflowed (clearing a previously set OERR bit (1

 0 transition) will reset

the receiver buffer and the RSR to the empty state)

bit 0

URXDA:

Receive Buffer Data Available bit (read-only)

= Receive buffer has data; at least one more character can be read

= Receive buffer is empty

UxSTA: UARTx STATUS AND CONTROL REGISTER (CONTINUED)

Note 1:

Value of bit only affects the transmit properties of the module when the IrDA® encoder is enabled (IREN = 1).

If UARTEN = 1, the peripheral inputs and outputs must be configured to an available RPn pin. See

Section 10.4 “Peripheral Pin Select”

for more information.

64GA106 датащи(PDF) 199 Page - Microchip Technology