CD00237391 datasheet(63/177 Pages) STMICROELECTRONICS

63 / 177 page

STM32F20xxx

Electrical characteristics

Doc ID 15818 Rev 9

63/177

5.3

Operating conditions

5.3.1

General operating conditions

Table 10.

Current characteristics

Symbol

Ratings

Max.

Unit

IVDD

Total current into VDD power lines (source)

(1)

All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

120

IVSS

Total current out of VSS ground lines (sink)

(1)

120

IIO

Output current sunk by any I/O and control pin

Output current source by any I/Os and control pin

IINJ(PIN)

(2)

Negative injection disturbs the analog performance of the device. See note in Section 5.3.20: 12-bit ADC

characteristics.

Injected current on five-volt tolerant I/O(3)

Positive injection is not possible on these I/Os. A negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 9 for the values of the maximum allowed input voltage.

–5/+0

Injected current on any other pin(4)

A positive injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 9 for the values of the maximum allowed input voltage.

±5

ΣIINJ(PIN)(4)

Total injected current (sum of all I/O and control pins)(5)

When several inputs are submitted to a current injection, the maximum

ΣI

INJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values).

±25

Table 11.

Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

–65 to +150

°C

Maximum junction temperature

125

°C

Table 12.

General operating conditions

Symbol

Parameter

Conditions

Min

Max

Unit

fHCLK

Internal AHB clock frequency

120

MHz

fPCLK1

Internal APB1 clock frequency

fPCLK2

Internal APB2 clock frequency

VDD

Standard operating voltage

1.8(1)

3.6

VDDA

(2)

Analog operating voltage

(ADC limited to 1 M samples)

Must be the same potential as VDD

(3)

1.8(1)

3.6

Analog operating voltage

(ADC limited to 2 M samples)

2.4

3.6

VBAT

Backup operating voltage

1.65

3.6

CD00237391 датащи(PDF) 63 Page - STMicroelectronics

CD00237391 датащи(HTML) 63 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL