DM300018 datasheet(23/115 Pages) MICROCHIP

23 / 115 page

Getting Started

DS51558A-page 17

2.5

DEVICE PROGRAMMING PROCESS

The second phase of the getting-started process introduces the MPLAB Integrated

Development Environment (IDE) and MPLAB ICD 2 In-Circuit Debugger. The

emphasis in this phase is to program the sample application into a dsPIC30F4011

device. After observing the demonstration, this process gets you ready to examine

what you observed.

2.5.1

Connect MPLAB ICD 2

Follow the information in Figure 2-2 to set up the MPLAB ICD 2 for use as a

programmer.

With an RJ11 cable, connect the MPLAB ICD 2 to the ICD header (J1) on the

board.

Use a USB cable to connect the MPLAB ICD 2 to your PC.

FIGURE 2-4:

MPLAB® ICD 2 CONNECTION DIAGRAM

2.5.2

Setting up MPLAB IDE

The sample application program files on the dsPICDEM 2 CD contain a workspace and

project information needed by MPLAB IDE, MPLAB ICD 2 and MPLAB C30.

The first step is to open the sample application project in MPLAB IDE.

A project contains the files needed to build an application (source code, linker script

files, etc.) along with their associations to various build tools and build options. A work-

space contains information on the selected device, debug tool and/or programmer,

open windows and their location, and other MPLAB IDE configuration settings.

Start MPLAB IDE.

From the

File menu select Open Workspace>[path], as shown in Figure 2-5,

where

[path] is the location of the sample application files.

Note:

Make sure that the USB driver for the MPLAB ICD 2 has been installed on

your PC (see the

MPLAB® ICD 2 User’s Guide, DS51331, for more details

regarding the installation of MPLAB ICD 2).

12 3 4

123 4

U2A1

U1A1

U2B1

U1B1

U1C1

Motor

Control

General

Purpose

MPLAB ICD 2

115 VAC

9 VDC Power Cable

Connect RJ-11 cable to ICD

dsPICDEM™ 2 Development Board

running dsPIC30F4011 sample

application

Connect USB cable to PC

Connect RS-232 cable to

Apply power to the board

PC running MPLAB® IDE

Note:

These instructions presume the use of MPLAB IDE version 7.11 or newer

and MPLAB C30 version 1.32 or newer.

DM300018 датащи(PDF) 23 Page - Microchip Technology

DM300018 датащи(HTML) 23 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL