MAX9130EXT datasheet(3/8 Pages) MAXIM

3 / 8 page

Single 500Mbps LVDS Line Receiver in SC70

_______________________________________________________________________________________

AC ELECTRICAL CHARACTERISTICS

(VCC = +3.0V to +3.6V, CL = 15pF, differential input voltage |VID| = 0.15V to 1.0V, input common voltage VCM = |VID/2| to 2.4V - |VID

/2|, input rise and fall time = 1ns (20% to 80%), input frequency = 250MHz, TA = -40°C to +85°C, unless otherwise noted. Typical val-

ues at VCC = +3.3V, |VID| = 0.2V, VCM = 1.2V, TA = +25°C.) (Figures 2 and 3) (Notes 4 and 5)

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

Differential Propagation Delay

High to Low

tPHLD

1.2

1.8

Differential Propagation Delay

Low to High

tPLHD

1.2

1.8

Differential Pulse Skew

|tPHLD - tPLHD| (Note 6)

tSKD1

250

Differential Part-to-Part Skew

(Note 7)

tSKD2

1.3

Differential Part-to-Part Skew

(Note 8)

tSKD3

1.8

Rise Time

tTLH

0.5

0.8

Fall Time

tTHL

0.5

0.8

Maximum Operating Frequency

(Note 9)

fMAX

250

MHz

Note 2: Maximum and minimum limits over temperature are guaranteed by design and characterization. Devices are production

tested at TA = +25°C.

Note 3: Current into a pin is defined as positive. Current out of a pin is defined as negative. All voltages are referenced to ground

except VTH, VTL, and VID.

Note 4: AC parameters are guaranteed by design and characterization.

Note 5: CL includes scope probe and test jig capacitance.

Note 6: tSKD1 is the magnitude difference of differential propagation delays. tSKD1 = |tPHLD - tPLHD|.

Note 7: tSKD2 is the magnitude difference of any differential propagation delays between parts operating over rated conditions at

the same VCC and within 5°C of each other.

Note 8: tSKD3 is the magnitude difference of any differential propagation delays between parts operating over rated conditions.

Note 9: fMAX pulse generator output conditions: rise time = fall time = 1ns (0% to 100%), 50% duty cycle, VOH = +1.3V, VOL = +1.1V.

MAX9130 output criteria: 60% to 40% duty cycle, VOL = 0.25V max, VOH = 2.7V min, load = 15pF.

MAX9130EXT датащи(PDF) 3 Page - Maxim Integrated Products

MAX9130EXT датащи(HTML) 3 Page - Maxim Integrated Products

Html Pages

1 2 3 4 5 6 7 8

датащи скачать

ссылки URL