Analog Integrated Circuit Device Data



44

Freescale Semiconductor

07XSC200

5.4.4.10 Default Device Configuration

The default device configuration is explained by the following:

• HS output is commanded by the corresponding IN input or On bit through the SPI. The medium slew-rate is used,

• HS output is fully protected by the Xenon overcurrent profile by default, the severe short-circuit protection, the undervoltage

and the overtemperature protection. The auto-retry feature is enabled,

• No current recopy and no analog temperature feedback active,

• Overvoltage protection is enabled,

• SO reporting fault status must be ignored,