DSPIC33FJ06GS101TESLASHML datasheet(39/346 Pages) MICROCHIP

39 / 346 page

Preliminary

DS70318D-page 37

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

3.6.1

MULTIPLIER

The 17-bit x 17-bit multiplier is capable of signed or

unsigned operation and can multiplex its output using a

scaler to support either 1.31 fractional (Q31) or 32-bit

integer results. Unsigned operands are zero-extended

into the 17th bit of the multiplier input value. Signed

operands are sign-extended into the 17th bit of the

multiplier input value. The output of the 17-bit x 17-bit

multiplier/scaler is a 33-bit value that is sign-extended

to 40 bits. Integer data is inherently represented as a

signed 2’s complement value, where the Most

Significant bit (MSb) is defined as a sign bit. The range

of an N-bit 2’s complement integer is -2N-1 to 2N-1 – 1.

• For a 16-bit integer, the data range is -32768

(0x8000) to 32767 (0x7FFF) including 0.

• For a 32-bit integer, the data range is

-2,147,483,648 (0x8000 0000) to 2,147,483,647

(0x7FFF FFFF).

When the multiplier is configured for fractional

multiplication, the data is represented as a 2’s

complement fraction, where the MSb is defined as a

sign bit and the radix point is implied to lie just after the

sign bit (QX format). The range of an N-bit 2’s

complement fraction with this implied radix point is -1.0

to (1 – 21-N). For a 16-bit fraction, the Q15 data range

is -1.0 (0x8000) to 0.999969482 (0x7FFF) including 0

and has a precision of 3.01518x10-5. In Fractional

mode, the 16 x 16 multiply operation generates a

1.31 product that has a precision of 4.65661 x 10-10.

The same multiplier is used to support the MCU

multiply instructions, which include integer 16-bit

signed, unsigned and mixed sign multiply operations.

The MUL instruction can be directed to use byte or

word-sized operands. Byte operands will direct a 16-bit

result, and word operands will direct a 32-bit result to

the specified register(s) in the W array.

3.6.2

DATA ACCUMULATORS AND

ADDER/SUBTRACTER

The data accumulator consists of a 40-bit adder/

subtracter with automatic sign extension logic. It can

select one of two accumulators (A or B) as its pre-

accumulation

source

and

post-accumulation

destination. For the ADD and LAC instructions, the data

to be accumulated or loaded can be optionally scaled

using the barrel shifter prior to accumulation.

3.6.2.1

Adder/Subtracter, Overflow and

Saturation

The adder/subtracter is a 40-bit adder with an optional

zero input into one side, and either true or complement

data into the other input.

• In the case of addition, the Carry/Borrow input is

active-high and the other input is true data (not

complemented).

• In the case of subtraction, the Carry/Borrow input

is active-low and the other input is complemented.

The adder/subtracter generates Overflow Status bits,

SA/SB and OA/OB, which are latched and reflected in

the STATUS register:

• Overflow from bit 39: this is a catastrophic

overflow in which the sign of the accumulator is

destroyed.

• Overflow into guard bits, 32 through 39: this is a

recoverable overflow. This bit is set whenever all

the guard bits are not identical to each other.

The adder has an additional saturation block that

controls accumulator data saturation, if selected. It

uses the result of the adder, the Overflow Status bits

described

previously

and

the

SAT<A:B>

(CORCON<7:6>) and ACCSAT (CORCON<4>) mode

control bits to determine when and to what value to

saturate.

Six STATUS register bits support saturation and

overflow:

• OA: ACCA overflowed into guard bits

• OB: ACCB overflowed into guard bits

• SA: ACCA saturated (bit 31 overflow and

saturation)

ACCA overflowed into guard bits and saturated

(bit 39 overflow and saturation)

• SB: ACCB saturated (bit 31 overflow and

saturation)

ACCB overflowed into guard bits and saturated

(bit 39 overflow and saturation)

• OAB: Logical OR of OA and OB

• SAB: Logical OR of SA and SB

The OA and OB bits are modified each time data

passes through the adder/subtracter. When set, they

indicate that the most recent operation has overflowed

into the accumulator guard bits (bits 32 through 39).

The OA and OB bits can also optionally generate an

arithmetic warning trap when set and the correspond-

ing Overflow Trap Flag Enable bits (OVATE, OVBTE) in

the INTCON1 register are set (refer to Section 7.0

“Interrupt Controller”

). This allows the user applica-

tion to take immediate action, for example, to correct

system gain.

DSPIC33FJ06GS101TE/ML датащи(PDF) 39 Page - Microchip Technology

DSPIC33FJ06GS101TE/ML датащи(HTML) 39 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL