3

For more information, contact an Omron representative at 1-800-55-OMRON

CPM2C-S1❑0C

CPM2C-S1❑0C

s

General and Performance Specifications (continued)

Item

Specifications

Data Memory

Read/Write

2,048 words (DM 0000 to DM 2047)

The Error Log is contained in DM 2000 to DM 2021

Read-only

456 words (DM 6144 to DM 6599)

PC Setup

56 words (DM 6600 to DM 6655)

Basic interrupt functions

Input interrupts

2 interrupts (shared by input interrupt counter mode and the quick-response inputs)

Scheduled

1 interrupt

interrupts

High-speed counter

High-speed

1 counter (20 kHz single-phase or 5 kHz two-phase)

functions

counter

Counter interrupt

1 interrupt

Input interrupts

2 interrupts (shared by input interrupt counter mode and the quick-response inputs)

(counter mode)

Count-up interrupt

2 interrupts (shared by input interrupt counter mode and the quick-response inputs)

Quick-response inputs

2 inputs

Minimum pulse input: 50

µs

Shared by input interrupts and input interrupt counter mode

Pulse outputs

Either 2 points with no acceleration/deceleration, 10 Hz to 10 kHz each, and no

direction control, 1 point with trapezoid acceleration/deceleration, 10 Hz to 10 kHz,

and direction control, or 2 points with variable duty-ratio outputs

Synchronized pulse control

1 point

Input time constant

Can be set for CPU Unit inputs and Expansion Unit input points

(ON response time = OFF response time)

(1, 2, 3, 5, 10, 20, 40, or 80 ms)

Clock function

Built-in RTC

Communications

Peripheral port:

Supports Host Link, peripheral bus, no protocol, or Programming Console connections

functions

RS-232C port:

Supports Host Link, no protocol, 1:1 Slave Unit Link, 1:1 Master Unit Link,

or 1:1 NT Link connections

Memory protection

HR area, AR area, counter values, read/write DM area contents, and counter values

maintained during power interruptions

Memory backup

Non-volatile memory, user programs, read-only DM area and PC setup are backed up

Lithium battery (2-year)

DM area, HR area, AR area and counter values are backed up

Self-diagnostic functions

CPU Unit failure (watchdog timer), memory failure, communications error, setting error,

battery error, and I/O bus error

Program checks

No END instruction, programming errors (checked when operation is started)

Connection tools

Programming

C200H-PRO27, CQM1-PRO01, CQM1H-PRO01

console

SSS

IBM PC/AT or compatible (SYSMAC Support Software V1.1)

CPT

Windows

CX-P

Windows