CS3100C18-3PW datasheet(17/73 Pages) AMPHENOL

17 / 73 page

wall mounting receptacle

cable connecting plug

box mounting receptacle

straight plug

MS/Standard

MS-R

Specification requirements for greater reliability in a

shorter, lighter weight environmental resistant connector

led to the design of the MS-R. MS Class R connectors

satisfy all the performance requirements of MIL-DTL-

5015.

This low profile assembly was attained by moving the

axial compression nut and grommet assembly forward

and flush with the rear of the insert. The neoprene grom-

met, with its low coefficient of friction, assures easier

threading of wire bundles and quicker assembly and ser-

viceability of the unit. Molded webs in each wire hole

insure a moisture barrier around each wire.

The addition of an “O” ring at the main joint of all

MS3106R plugs provide a main joint seal supplementary

to the interfacial seal, thus insuring a higher degree of

reliability when connector halves from different sources

are employed. MS-R types are recommended for new

design applications.

Shells:

Shell components are fabricated from high grade alumi-

num alloy. All components have the standard electrically

conductive cadmium plated finish with an olive drab chro-

mate after-treatment for corrosion resistance. Consult

Amphenol, Sidney, NY for other plating options.

Contacts:

Contacts are machined from copper alloy for maximum

corrosion resistance, maximum current carrying capacity

and low millivolt drop. Both crimp and solder versions are

available. Refer to pages 49, 67 and 68 for additional

contact information.

Inserts:

Resilient neoprene inserts provide an outstanding mois-

ture barrier, maximum vibration resistance and high

dielectric strength. Either pin or socket insert can be

pressurized.

CS3100C18-3PW датащи(PDF) 17 Page - Amphenol Corporation