CS3100C18-3PW datasheet(11/73 Pages) AMPHENOL

11 / 73 page

MS/Standard

MS-E/F

MS-E & F

MS Class F connectors satisfy all the performance

requirements of MIL-DTL-5015. Class E, environmental

is also produced, but is no longer listed on the qualified

products listing (QPL). These connectors are recom-

mended for conditions where vibration, moisture, pres-

sure and/or temperature are extreme. Strain relief is

supplied on most shell sizes.

Shells:

Shell components are fabricated from high grade alumi-

num alloy. The standard hardware plating is electrically

conductive cadmium plated finish with an olive drab chro-

mate after-treatment for corrosion resistance. Consult

Amphenol, Sidney, NY for other plating options.

Contacts:

Contacts are silver plated copper alloy for maximum cor-

rosion resistance, maximum current carrying capacity

and low millivolt drop. Size 16 and 12 socket contacts

incorporate a closed entry design. Crimp and solder ver-

sions are available. Refer to pages 49, 67 and 68 for

additional contact information.

Inserts:

Resilient neoprene inserts provide an outstanding mois-

ture barrier, high dielectric strength, and resistance to

vibration. Either pin or socket insert can be pressurized.

Strain Relief Clamp:

Strain relief clamps minimize tension at the solder well

connection and provide a positive mechanical moisture

seal. Complete field serviceability is possible with the

strain relief clamp.

wall mounting receptacle

cable connecting plug

box mounting receptacle

straight plug

90 degree plug

CS3100C18-3PW датащи(PDF) 11 Page - Amphenol Corporation