ADDC02803SC/ADDC02805SA

REV. A

–18–

Screening Levels for ADDC02803SC/ADDC02805SA

Screening Steps

Industrial (KV)

Ruggedized Industrial (TV)

MIL-STD-883B/SMD (TV/QMLH)

Pre-Cap Visual

100%

MIL-STD-883, TM2017

Temp Cycle

N/A

N/A

Constant Acceleration

N/A

N/A

Fine Leak

Guaranteed to Meet

Guaranteed to Meet

MIL-STD-883, TM1014

MIL-STD-883, TM1014

Compliant to MIL-PRF-38534

Gross Leak

Guaranteed to Meet

Guaranteed to Meet

MIL-STD-883, TM1014

MIL-STD-883, TM1014

Burn-In

N/A

MIL-STD-883, TM1015,

96 Hrs at +125

°C Case

Final Electrical Test

At +25

°C, Per Specification

At +25

°C, Per Specification

Table

Table

NOMINAL CASE DIMENSIONS IN INCHES AND (mm)

(All tolerances

± .005" [± .13 mm] unless otherwise specified)

0.150 (3.81)

0.100 (2.54)

8 PLCS

0.200 (5.08)

0.150 (3.81)

0.200 (5.08)

0.390

0.010

(9.91

0.25)

0.800

0.010

(20.32

0.25)

1.145 (29.08)

2 PLCS

0.150 (3.81)

4 PLCS

TOP VIEW

0.149 (3.78)

DIA TYP

0.300 (7.62) SQ

0.010

4 PLCS

0.200 (5.08) 5 PLCS

0.250 (6.35)

2 PLCS

1.500

0.010

(38.10

0.25)

0.040

0.003

(1.02

0.08)

0.090

0.010

(2.29

0.25)

4 PLCS

2.745

0.010

(69.72

0.25)

1.800

(45.72)

TYP

2.100

0.010

(53.34

0.25)

NOTES

1. The final product weight is 85 grams maximum.

2. The package base material is made of molybdenum and is

nominally 40 mils (1.02 mm) thick. The “runout” is less

than 2 mils per inch (0.02 mm per cm).

3. The high current pins (10–17) are 40 mil (1.02 mm) diameter;

are 99.8% copper; and are plated with gold over nickel.

4. The signal carrying pins (1–9) are 18 mil (0.46 mm) diam-

eter; are Kovar; and are plated with gold over nickel.

5. All pins are a minimum length of 0.740 inches (18.80 mm)

when the product is shipped. The pins are typically bent up

or down and cut shorter for proper connection into the user’s

system.

6. All pin-to-sidewall spacings are guaranteed for a minimum of

500 V dc breakdown at standard air pressure.

7. The case outline was originally designed using the inch-

pound units of measurement. In the event of conflict be-

tween the metric and inch-pound units, the inch-pound shall

take precedence.