EV8000 datasheet(16/35 Pages) CMLMICRO

16 / 35 page

Evaluation Kit User Manual for FX828 and FX829

EV8000

UM8000/4

1.6.3

Software Description - Signalling Processor Board

1.6.3.1 Installation

The ES8000 Windows Application Software consists of a single executable file named

ES8000xx.EXE, where xx refers to the version number. Copy this from its 3.5” floppy disk to the

hard disk of the user’s PC.

Windows NT and '95

For convenient and quick launching of the program create an ES8000 shortcut within the Start

menu or Desktop.

Windows 3.11

For convenient and quick launching of the ES8000 software create a new program group and

ES8000 icon.

1.6.3.2 System Requirements

This program is a 16-bit application, compatible with Windows 3.11, NT and '95 operating

systems. The software has been designed to operate on a 386DX 40MHz or faster with 8MB of

RAM. We recommend that the user has the screen resolution set no lower than 800 x 600, to

allow maximised device forms to fit within the screen.

Note:

ES8000 Version 1.0 requires the signalling processor board crystal (X1) frequency to be

4.032MHz, to ensure correct generation of frequency data.

1.6.3.3 Starting the ES8000 Windows Application Software

Windows NT and '95

To execute the program from the Start Menu click on the Start Button, and then point to the

folder that contains the ES8000 Windows Application Software. Click on the program when it has

been located.

If a shortcut has not been created in the Start Menu then execute the program using the Run

command, click on the Start button and then click on Run. Type the path and name of the

program and then click on the OK button. If the program path is unknown click on Browse to look

for the item.

Windows 3.11

To execute the program locate the ES8000 icon from the appropriate program group. Double

click on the program icon when it has been located.

If a program group and icon has not been created execute the program using the Run command,

click on the File menu then click on Run. Type the path and name of the program and then click

on the OK button. If the program path is unknown click on Browse to look for the item.

1.6.3.4 Shutting Down the ES8000 Windows Application Software

Windows NT and '95

To quit the ES8000 program click on the close button in the upper-right corner of the main

application window.

Windows 3.11

To quit the ES8000 program click on the upper-left corner pulldown application menu, click on

the close command.

EV8000 датащи(PDF) 16 Page - CML Microcircuits

EV8000 датащи(HTML) 16 Page - CML Microcircuits

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

датащи скачать

ссылки URL