SC312XDP512F0MPVR datasheet(800/1348 Pages) FREESCALE

800 / 1348 page

Chapter 21 External Bus Interface (S12XEBIV2)

MC9S12XDP512 Data Sheet, Rev. 2.21

802

Freescale Semiconductor

21.5.1

Normal Expanded Mode

This mode allows interfacing to external memories or peripherals which are available in the commercial

market. In these applications the normal bus operation requires a minimum of 1 cycle stretch for each

external access.

21.5.1.1

Example 1a: External Wait Feature Disabled

The first example of bus timing of an external read and write access with the external wait feature disabled

is shown in

•

Figure ‘Example 1a: Normal Expanded Mode — Read Followed by Write’

The associated supply voltage dependent timing are numbers given in

•

Table ‘Example 1a: Normal Expanded Mode Timing VDD5 = 5.0 V (EWAITE = 0)’

•

Table ‘Example 1a: Normal Expanded Mode Timing VDD5 = 3.0 V (EWAITE = 0)’

Systems designed this way rely on the internal programmable access stretching. These systems have

predictable external memory access times. The additional stretch time can be programmed up to 8 cycles

to provide longer access times.

21.5.1.2

Example 1b: External Wait Feature Enabled

The external wait operation is shown in this example. It can be used to exceed the amount of stretch cycles

over the programmed number in EXSTR[2:0]. The feature must be enabled by writing EWAITE = 1.

If the EWAIT signal is not asserted, the number of stretch cycles is forced to a minimum of 2 cycles. If

EWAIT is asserted within the predefined time window during the access it will be strobed active and

another stretch cycle is added. If strobed inactive, the next cycle will be the last cycle before the access is

finished. EWAIT can be held asserted as long as desired to stretch the access.

An access with 1 cycle stretch by EWAIT assertion is shown in

•

Figure ‘Example 1b: Normal Expanded Mode — Stretched Read Access’

•

Figure ‘Example 1b: Normal Expanded Mode — Stretched Write Access’

The associated timing numbers for both operations are given in

•

Table ‘Example 1b: Normal Expanded Mode Timing VDD5 = 5.0 V (EWAITE = 1)’

•

Table ‘Example 1b: Normal Expanded Mode Timing VDD5 = 3.0 V (EWAITE = 1)’

It is recommended to use the free-running clock (ECLK) at the fastest rate (bus clock rate) to synchronize

the EWAIT input signal.

SC312XDP512F0MPVR датащи(PDF) 800 Page - Freescale Semiconductor, Inc

SC312XDP512F0MPVR датащи(HTML) 800 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL