33899 datasheet(16/26 Pages) FREESCALE

16 / 26 page

Analog Integrated Circuit Device Data

Freescale Semiconductor

33899

FUNCTIONAL DESCRIPTION

FUNCTIONAL PIN DESCRIPTION

the input data from the DI input until CS eventually transitions

from a logic [0] to a logic [1].

The DO output pin is in a high-impedance condition unless

is low, at least one enable pin is high and VCC and VCCL

are within the normal operating range. When active, the

output is “rail to rail”, depending on the voltage at the VDDQ

pin.

SERIAL DATA INPUT (DI)

The DI input takes data from the microprocessor while CS

is asserted (low). The MSB is the first bit of each word

received on DI and the LSB is the last bit of each word

received on DI. The 33899 serially wraps around the DI input

bits to the DO output after the DO output transmits its fault

flag bits. The first 8 bits before CS goes high are latched into

the Control register. Any bytes transmitted before the last 8

bits are just wrapped around to the DO output and are not

used by the 33899 (see Figure 10).

This pin has TTL-level compatible input voltages, which

allow proper operation with microprocessors using a 3.3V to

5.0V supply.

Figure 10. SPI Operation with Extended CS

LOGIC OUT BIAS (VDDQ)

The VDDQ input pin provides the bias voltage for the data

out buffer and LS Comparator. It must be connected to the

same power supply that is used by the microprocessor’s SPI

I/O.

CS*

DI/

SCLK

Fault/Temp Data (1 Byte)

1st DI Byte

DI Control Register (1 Byte)

Not Used (1 Byte)

DI/

SCLK

Not Used (1 Byte)

DI Control Register (1 Byte)

First DI Byte

Fault/Temperature Data (1 Byte)

33899 датащи(PDF) 16 Page - Freescale Semiconductor, Inc

33899 датащи(HTML) 16 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

датащи скачать

ссылки URL