ATmega328P datasheet(277/448 Pages) ATMEL

277 / 448 page

277

8161D–AVR–10/09

ATmega48PA/88PA/168PA/328P

26. Boot Loader Support – Read-While-Write Self-Programming,

ATmega88PA, ATmega168PA and ATmega328P

26.1

Features

• Read-While-Write Self-Programming

• Flexible Boot Memory Size

• High Security (Separate Boot Lock Bits for a Flexible Protection)

• Separate Fuse to Select Reset Vector

• Optimized Page(1) Size

• Code Efficient Algorithm

• Efficient Read-Modify-Write Support

Note:

1. A page is a section in the Flash consisting of several bytes (see Table 27-11 on page 299)

used during programming. The page organization does not affect normal operation.

26.2

Overview

In ATmega88PA, ATmega168PA and ATmega328P, the Boot Loader Support provides a real

Read-While-Write Self-Programming mechanism for downloading and uploading program code

by the MCU itself. This feature allows flexible application software updates controlled by the

MCU using a Flash-resident Boot Loader program. The Boot Loader program can use any avail-

able data interface and associated protocol to read code and write (program) that code into the

Flash memory, or read the code from the program memory. The program code within the Boot

Loader section has the capability to write into the entire Flash, including the Boot Loader mem-

ory. The Boot Loader can thus even modify itself, and it can also erase itself from the code if the

feature is not needed anymore. The size of the Boot Loader memory is configurable with fuses

and the Boot Loader has two separate sets of Boot Lock bits which can be set independently.

This gives the user a unique flexibility to select different levels of protection.

26.3

Application and Boot Loader Flash Sections

The Flash memory is organized in two main sections, the Application section and the Boot

Loader section (see Figure 26-2). The size of the different sections is configured by the

BOOTSZ Fuses as shown in Table 26-7 on page 289 and Figure 26-2. These two sections can

have different level of protection since they have different sets of Lock bits.

26.3.1

Application Section

The Application section is the section of the Flash that is used for storing the application code.

The protection level for the Application section can be selected by the application Boot Lock bits

(Boot Lock bits 0), see Table 26-2 on page 281. The Application section can never store any

Boot Loader code since the SPM instruction is disabled when executed from the Application

section.

26.3.2

BLS – Boot Loader Section

While the Application section is used for storing the application code, the The Boot Loader soft-

ware must be located in the BLS since the SPM instruction can initiate a programming when

executing from the BLS only. The SPM instruction can access the entire Flash, including the

BLS itself. The protection level for the Boot Loader section can be selected by the Boot Loader

Lock bits (Boot Lock bits 1), see Table 26-3 on page 281.

ATmega328P датащи(PDF) 277 Page - ATMEL Corporation

ATmega328P датащи(HTML) 277 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL