ADIS16260/ADIS16265

Preliminary Technical Data

Rev. PrB | Page 6 of 19

ABSOLUTE MAXIMUM RATINGS

Table 3.

Parameter

Rating

Acceleration (Any Axis, Unpowered, 0.5 ms)

2000 g

Acceleration (Any Axis, Powered, 0.5 ms)

2000 g

−0.3 V to +6.0 V

Digital Input/Output Voltage to COM

−0.3 V to +5.5 V

Analog Inputs to COM

−0.3 V to +3.5 V

−40°C to +105°C

−65°C to +150°C

range of −40°C to +85°C can adversely affect the accuracy of the factory

calibration. For best accuracy, store the parts within the specified operating

range of −40°C to +85°C.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

RATEOUT

RATEIN

+8191 LSB

–8192 LSB

1

5 6

10

LONGITUDINAL

AXIS

CLOCKWISE

ROTATION

RATE

AXIS

LATERAL

AXIS

Figure 4. RATEOUT Level Increase with Clockwise Rotation Increase

ESD CAUTION