ABSOLUTE MAXIMUM RATINGS

DISSIPATION RATINGS

RECOMMENDED OPERATING CONDITIONS

TPS65192

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

ORDERING

PACKAGE

PACKAGE MARKING

–40°C to 85°C

TPS65192RHDR

28-Pin QFN

TPS65192

(1)

The device is supplied taped and reeled, with 3000 devices per reel.

over operating free-air temperature range (unless otherwise noted)

(1)

VALUE

UNIT

VGH1, VGH2

–0.3 to 45

V

VGL

0.3 to –15

V

IN1 through IN9, VSENSE, FLK1, FLK2, FLK3

–0.3 to 7.0

V

RE

–0.3 to 45

V

Output current

RE

0.1

A

ESD rating

HBM

2

kV

MM

200

V

CDM

700

V

Continuous power dissipation

See Dissipation Rating Table

Operating ambient temperature range

–40 to 85

°C

Operating junction temperature range

–40 to 150

°C

Storage temperature range

–65 to 150

°C

Lead temperature (soldering, 10 sec)

300

°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values are with respect to the GND pin.

θ

JA

PACKAGE

POWER RATING

POWER RATING

POWER RATING

35°C/W

3.57W

2.29W

1.86W

(1)

This data is based on using a JEDEC High-K board with the exposed die pad connected to a Cu pad

on the board connected to the ground plane by a 2x3 thermal via matrix.

MIN

TYP

MAX

UNIT

Positive supply voltage range

12

30

38

V

Negative supply voltage range

–13

–7

–2

V

Operating ambient temperature

–40

85

°C

Operating junction temperature

–40

125

°C

2

Submit Documentation Feedback

Copyright © 2009, Texas Instruments Incorporated

Product Folder Link(s): TPS65192