
IP113F
Preliminary Data Sheet
Extended MII registers and EEPROM registers (continued)
MII
ROM
NAME
R/W
DESCRIPTION
DEFAULT
Switch configuration register 1 (MII register 20D, EEPROM register 02~03D)
20.0
2.0
mg_crossover_en
R/W
Select TP to be MDIX or MDI. It is valid only
if MII register16.11 is disabled.
0: MDI
1: MDIX
0
20.1
2.1
direct_wire
R/W
Please see pin description of DIRECT_WIRE
for more detail information.
Pin (0)
20.2
2.2
fast_fwd
R/W
Please see pin description of FAST_FWD for
more detail information.
Pin (0)
20.3
2.3
mg_pass_fragment
_
en
R/W
Pass fragment packet (>7B and <64B)
1: pass fragment
0: not pass fragment
0
20.4
2.4
mg_col16_drop_en
R/W
Collision 16 times drop enable
1: drop
0: not drop
0
20.5
2.5
mg_col_backoff
_en
R/W
Collision back-off enable
1: back after collision
0: not back off after collision
1
20.6
2.6
reserved
R/W
It must be 0.
0
20.7
2.7
p01_mg_backpress
_en
R/W
TP port backpressure control enable for half
duplex
1: backpressure enable
0: backpressure disable
1
20.8
3.0
mg_rem_ctrl_en
R/W
Remote control enable (TX/RX. ability for
maintenance frame)
1: ability enable
0: ability disable
1
20.9
3.1
mg_auto_tx_mf_en
R/W
Auto send status frame to remote partner
enable (AUTO_SEND)
1: auto send indication maintenance frame
0: disable auto send
Pin (0)
20.10
3.2
mg_auto_tx_ttc
_content
R/W
The content of auto send status frame
1: TTC (TS-1000)
The frame format is defined in TS-1000.
0: ICPLUS
The frame format is similar to the one
defined in TS-1000 except the bit definition
of S[15:0]. S[15:0] is the content of MII
register 22[15:0]. Local IP113F uses the
frame to indicate its status to the remote
IP113F. The remote IP113F receives the
frame and stores the information to the MII
register 23.
1
20.11
3.3
mg_sd_off_way
R/W
Informing way for optical receiving SD off
1: far end fault pattern
0: maintenance frame
1
Confidential.
38/46
Aug. 20, 2003
Copyright © 2003, IC Plus Corp.
IP113F-DS-R02