PLB12F0000SLASHAA. datasheet(54/72 Pages) POSITRONIC

54 / 72 page

Power

Connection

Systems

Positronic

connectpositronic.com

DIMENSIONS ARE IN INCHES [MILLIMETERS].

ALL DIMENSIONS ARE SUBJECT TO CHANGE.

REMOVABLE CONTACT TECHNICAL

INFORMATION AND REMOVABLE

CRIMP SIGNAL CONTACT, SIZE 20

For information regarding

CRIMP TOOLS & CRIMPING TOOL TECHNIQUES, see page 54

0.649 [16.48]

0.255 [6.48]

ØB

ØA

Ø0.040

[1.00]

0.255 [6.48]

0.764 [19.41]

ØA

ØB

MALE CONTACT

FEMALE CONTACT

REMOVABLE CRIMP SIGNAL CONTACT

FOR USE WITH PCS MIXED DENSITY SERIES CONNECTORS

CONTACTS MUST BE ORDERED SEPARATELY

SIZE 20

PART NUMBER

WIRE SIZE

AWG/[mm2]

ØA

ØB

FC720N2

20 / 22 / 24

[0.5 / 0.3 / 0.25]

0.045

[1.14]

0.068

[1.73]

PART NUMBER

WIRE SIZE

AWG/[mm2]

ØA

ØB

MC720N3

20 / 22 / 24

[0.5 / 0.3 / 0.25]

0.045

[1.14]

0.068

[1.73]

MECHANICAL CHARACTERISTICS:

STANDARD AND

HIGH CONDUCTIVITY:

Insert contact to rear face of insulator, release

from front face of insulator. Size 8 contacts,

0.142 inch [3.61 mm] diameter male contacts,

closed entry design female contacts.

HIGH VOLTAGE:

Insert contact to rear face of insulator, release

from front face of insulator. Size 8 contacts.

Straight and right angle (90°) terminations.

0.041 inch [1.04 mm] minimum hole diameter.

Durability:

500 cycles minimum.

Vibration:

20g from 10 Hz to 500 Hz.

Shock:

30g-11ms.

SHIELDED:

Insert contact to rear face of insulator, release

from front face of insulator. Size 8 contacts.

See page 53 table of cable sizes for contact

Termination dimensions.

ELECTRICAL CHARACTERISTICS:

STANDARD:

Contact Current Rating:

See temperature rise curves on page 40.

For additional information see page 51-52.

Initial Contact Resistance:

0.001 ohms max. per IEC 60512-2, test 2b.

HIGH CONDUCTIVITY:

Contact Current Rating:

See temperature rise curves on page 40.

Initial Contact Resistance:

0.0003 ohms max. per IEC 60512-2, test 2b.

HIGH VOLTAGE:

Flash over Voltage:

3600 V r.m.s.

Proof Voltage:

2700 V r.m.s.

Initial Contact Resistance: 0.008 ohms maximum.

SHIELDED:

Initial Contact Resistance: 0.008 ohms maximum.

Nominal Impedance:

50 ohms.

Insertion Loss:

-0.46 dB at 1 GHz

-1.5 dB at 2 GHz

VSWR:

1.15 average at 1 GHz

1.56 average at 2 GHz

Above values measured using frequency domain techniques.

Proof Voltage:

1000 V r.m.s.

OPTIONAL PLATING FINISHES

-14

0.000030 [0.76 µ] gold over nickel by adding “-14” suffix

onto part number. Example: FC720N2-14.

-15

0.000050 inch [1.27µ] gold over nickel by adding “-15”.

Example: FC720N2-15.

RoHS OPTIONS:

/AA

Environmental Compliance Option: RoHS compliant

can be achieved by adding “/AA” suffix onto part number.

Examples: FC720N2/AA or for optional plating finishes

use FC720N2/AA-14.

REELED CONTACTS:

Contacts may be supplied in plastic carriers, packaged in reels

holding 2,000 contacts for use with the automatic pneumatic crimp

tools, catalog part numbers 9550-0 and 9550-1; packaged in reels

holding 1,000 contacts for use with the automatic pneumatic crimp

tools, catalog part number 9555-0-2. The same type carrier is used for

both male and female contacts.

All male and female crimp contacts can be ordered in reels by adding

letter “R” after the contact part number, such as MC6020DR for a male

contact and FC6026DR for a female contact.

REMOVABLE CONTACT TECHNICAL CHARACTERISTICS

continued from previous page . . .

Enlarged section of

plastic contact carriers

Note: Connectors can be kitted

with all applicable crimp/

solder contacts, con-

tact Technical Sales for

connector part number.

PLB12F0000/AA. датащи(PDF) 54 Page - Positronic.

PLB12F0000/AA. датащи(HTML) 54 Page - Positronic.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

датащи скачать

ссылки URL