PLB12F0000SLASHAA. datasheet(14/72 Pages) POSITRONIC

14 / 72 page

Power

Connection

Systems

Positronic

connectpositronic.com

DIMENSIONS ARE IN INCHES [MILLIMETERS].

ALL DIMENSIONS ARE SUBJECT TO CHANGE.

TECHNICAL INFORMATION

MATERIALS AND FINISHES:

Insulator:

Glass-filled polyester, UL 94V-0.

Contact technical sales for availability of high

temperature insulator material.

Contacts:

Precision machined copper alloy with gold

flash over nickel, or 0.000030 inch [0.76µ]

gold over nickel, or 0.000050 [1.27µ] gold

over nickel.

Solder coated terminations

optional.

Mounting Clip:

Beryllium copper with nickel plate.

Hood:

Glass filled polyester, UL 94V-0.

Mounting Bracket:

Brass with tin plate.

Push-on Fastener:

Spring tempered copper alloy, tin plate

ELECTRICAL CHARACTERISTICS:

CONTACT CURRENT RATING:

Standard Contact Material:

See page 9 for detail information.

High Conductivity

Contact Material:

See page 9 for detail information.

INITIAL CONTACT RESISTANCE:

Standard Contact Material:

0.0016 ohms max. per IEC 60512-2, test 2b.

High Conductivity

Contact Material:

0.0007 ohms max. per IEC 60512-2, test 2b.

Insulation Resistance:

5 G ohms per IEC 60512-2, test 3a, method A.

Voltage Proof:

2000 V rms per IEC 60512-2, test 4a, method C.

Creepage Distance:

0.157 inch [4 mm] minimum.

Clearance Distance:

0.125 inch [3.2 mm] minimum.

Working Voltage:

Designed to meet UL 600 VAC and

CSA 600 VAC.

Working Temperature:

-55°C to +125°C

Contact technical sales for availability of high

temperature insulator material.

ELECTRICAL CHARACTERISTICS OF COMPLIANT

PRESS-IN CONNECTION TO PLATED-THROUGH-HOLE

OF PRINTED BOARD:

0.064 inch [1.63mm] diameter hole of a 0.125

inch [3.2mm] thick printed board

Initial Contact Resistance

of Connection:

Less than 1.0 milliohms per IEC 60512-2,

test 2a.

Change in Contact

Resistance of Connection

After Mechanical, Electrical

or Climactic Conditioning:

Less than 0.5 milliohms increase per IEC

60512-2, test 2a.

Gas Tight Connections

Test:

Less than 0.2 milliohms increase in contact

resistance after 1 hour per EIA 364, TP36,

Method One.

SHIELDED CONTACT TECHNICAL

CHARACTERISTICS:

See page 47.

MECHANICAL CHARACTERISTICS:

Removable Contacts:

Insert contact to rear face of insulator, release

from front face of insulator. Size 16, 0.0625

inch [1.588 mm] diameter male contact.

Female contact “closed entry” design for

highest reliability.

Removable Contact Retention

in Insulator:

15 lbs. [67N] per IEC 60512-8, test 15a.

Fixed Contacts:

Solder cup and printed board terminations.

Size 16, 0.0625 inch [1.588 mm] diameter

male contact. Female contact has “closed

entry” design for highest reliability.

Fixed Contact Retention

in Insulator:

6 lbs. [26N].

Resistance to Solder

Iron Heat:

500˚F [260°C] for 10 seconds duration per IEC

60512-6, test 12e, 25 watt soldering iron.

Contact Terminations:

Crimp or solder removable contacts from wire

sizes 12 AWG [4.0 mm2] through 24 AWG [0.25

mm2]. Straight and Right Angle (90°) solder

printed board mount, 0.0625 inch [1.588 mm]

tail diameter. Compliant termination press-in.

Fixed contact solder cup termination, 18 AWG

[1.0 mm2] maximum.

Contact Insertion and

Withdrawal Forces:

8 oz. [2.2N] nominal per contact.

Connection Systems:

Connector provides cable to cable, cable

to printed board, cable to panel mount and

printed board to printed board application.

Sequential Mating System:

Cable and printed board mount connectors.

Male contacts provide as many as three mating

lengths.

Locking System:

Insulators provide locking between cable to

cable, cable to printed board and cable to

panel mount applications.

Polarizations:

Provided in insulator design. Further polar-

ization in cable connectors can be provided

by mixing male contacts in female insulators

and female contacts in male insulators.

Mounting to Printed Board:

Rapid installation push-on fasteners.

Self-tapping screws for compliant connectors.

Mechanical Operations:

500 operations per IEC 60512-5.

MECHANICAL CHARACTERISTICS OF COMPLIANT

PRESS-IN CONNECTORS:

Press-in Contact Bi-Spring

Construction, Compliant

Termination:

0.0695 inch [1.77mm] diameter with 0.050

inch [1.27mm] lead-in diameter. Offered with

two termination lengths.

Contact Retention in

Insulator and 0.125 inch

[3.2mm] thick printed board: 5 lbs. [22N] minimum combined retention

forces per MIL-STD-2166, Type III compliant

contact classification, after third repair-

replacement of contact in insulator and

plated-through-hole, 0.064 inch [1.63mm]

diameter in a 0.125 inch [3.2mm] thick print-

ed board.

Vibration:

No electrical discontinuity of 1µ second

or greater when tested per MIL-STD-1344,

Method 2005, Test conditioning.

Initial Press-In Force

of Individual Contact

into Plated-Through-Hole:

10 lbs. [44N] average when pushed into a

0.064 inch [1.63mm] Ø hole in a 0.125 inch

[3.2mm] thick printed board.

Initial Push-Out Force of

Individual Contact into

Plated-Through-Hole:

8.5 lbs. [38N] average when pushed out of an

0.064 inch [1.63mm] Ø hole in a 0.125 inch

[3.2mm] thick printed board.

TECHNICAL CHARACTERISTICS

CUL Recognized*

File # E49351

*Note: CUL recognizes all sizes, except PLB20, consult Technical

Sales for status.

PLB12F0000/AA. датащи(PDF) 14 Page - Positronic.

PLB12F0000/AA. датащи(HTML) 14 Page - Positronic.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

датащи скачать

ссылки URL