PLB12F0000SLASHAA. datasheet(53/72 Pages) POSITRONIC

53 / 72 page

Power

Connection

Systems

Positronic

connectpositronic.com

DIMENSIONS ARE IN INCHES [MILLIMETERS].

ALL DIMENSIONS ARE SUBJECT TO CHANGE.

For information regarding

CRIMP TOOLS & CRIMPING TOOL TECHNIQUES, see page 54

REMOVABLE CONTACT

TECHNICAL INFORMATION

REMOVABLE CONTACT TECHNICAL CHARACTERISTICS

. . . continued on next page

SHIELDED:

Dielectric Strength

At Sea Level:

600 V rms

Initial Contact Resistance: 0.012 ohms maximum

Insulation Resistance:

5 G ohms

Insertion Loss:

0.2 dB at 500 MHz for 126N contacts

1.0 dB at 500 MHz for 226N contacts

VSWR:

170 at 0 to 200 MHz

2.25 at 200 to 500 MHz

SIZE 12 REMOVABLE CONTACT

MATERIALS AND FINISHES:

STANDARD:

Precision machined copper alloy with gold flash

over nickel. Other finishes are available, see

optional plating finishes for -14 and -15.

HIGH CONDUCTIVITY:

Tellurium copper, gold flash over nickel. Other

finishes are available, see optional plating finishes

for -14 and -15.

MECHANICAL CHARACTERISTICS:

STANDARD AND

HIGH CONDUCTIVITY:

Insert contact to rear face of insulator, release

from front face of insulator. Size 12 contacts,

0.094 inch [2.39 mm] diameter male contacts.

Female contact closed entry for highest reliability.

ELECTRICAL CHARACTERISTICS:

STANDARD:

Contact Current Rating:

40 amperes continuous, derated per

IEC 60512-3, test 5b.

Initial Contact Resistance:

0.001 ohms max. per IEC 60512-2, test 2b.

HIGH CONDUCTIVITY:

Contact Current Rating:

See page 33 for detail information.

Initial Contact Resistance:

0.0007 ohms max. per IEC 60512-2, test 2b.

SIZE 8 REMOVABLE CONTACT

MATERIALS AND FINISHES:

STANDARD:

Precision machined copper alloy with gold flash

over nickel. Other finishes are available, see

optional plating finishes for -14 and -15.

HIGH CONDUCTIVITY:

Tellurium copper, gold flash over nickel. Other

finishes are available, see optional plating finishes

for -14 and -15.

HIGH VOLTAGE:

Insulator Material:

PTFE teflon

Contacts:

Male contacts, brass. Female contacts, phos-

phor bronze. Male and female contacts, 0.000030

inch [0.76µ] gold over nickel. Other finishes are

available, see optional plating finishes for -15.

SHIELDED:

Dielectric Material:

PTFE teflon

Inner Contacts:

Phosphor bronze, 0.000030 inch [0.76µ] gold over

nickel. Other finishes are available, see optional

plating finishes for -15.

Outer Contacts:

Brass and beryllium copper, gold flash over

nickel. Other finishes are available, see

optional plating finishes for -14.

SIZE 20 REMOVABLE CONTACT

MATERIALS AND FINISHES:

STANDARD:

Precision machined copper alloy with gold flash

over nickel. Other finishes are available, see

optional plating finishes for -14 and -15.

MECHANICAL CHARACTERISTICS:

STANDARD:

Insert contact to rear face of insulator, release

from front face of insulator. Size 20 contacts,

0.040 inch [1.02 mm] diameter male contacts,

closed entry design female contacts.

ELECTRICAL CHARACTERISTICS:

Contact Current Rating:

7.5 amperes nominal.

Initial Contact Resistance:

0.007 ohms max. per IEC 60512-2, test 2b.

SIZE 16 REMOVABLE CONTACT

MATERIALS AND FINISHES:

STANDARD:

Precision machined copper alloy with gold flash

over nickel. Other finishes are available, see

optional plating finishes for -14 and -15.

HIGH CONDUCTIVITY:

Tellurium copper, gold flash over nickel. Other

finishes are available, see optional plating finishes

for -14 and -15.

SHIELDED:

Dielectric Material:

PCTFE

Inner Contacts:

Phosphor bronze, 0.000030 inch [0.76µ] gold over

nickel. Other finishes are available, see optional

plating finishes for -15.

Outer Contacts:

Brass and beryllium copper, gold flash over

nickel. Other finishes are available, see optional

plating finishes for -14.

MECHANICAL CHARACTERISTICS:

STANDARD AND

HIGH CONDUCTIVITY:

Insert contact to rear face of insulator, release

from front face of insulator. Size 16 contacts,

0.0625 inch [1.588 mm] diameter male contacts.

Female contact closed entry for highest reliability.

SHIELDED:

Contact Retention

In Insulator:

18 lbs. [80N].

Removable Contacts:

Rear insertion, front removable.

Insertion Force

Per Contact:

8 oz. [2.2N] per contact maximum

Durability:

100 cycles minimum.

Vibration:

20g from 10 Hz to 500 Hz

Shock:

30g - 11 ms

ELECTRICAL CHARACTERISTICS:

STANDARD:

Contact Current Rating:

See page 9 for detail information.

Initial Contact Resistance:

0.0016 ohms max. per IEC 60512-2, test 2b.

HIGH CONDUCTIVITY:

Contact Current Rating:

See page 9 for detail information.

Initial Contact Resistance:

0.0007 ohms max. per IEC 60512-2, test 2b.

PLB12F0000/AA. датащи(PDF) 53 Page - Positronic.

PLB12F0000/AA. датащи(HTML) 53 Page - Positronic.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

датащи скачать

ссылки URL