TLVM13630 High-Density, 3-V to 36-V Input, 1-V to 6-V Output, 3-A Power Module With

Enhanced HotRod™ QFN Package

1 Features

• Versatile synchronous buck DC/DC module

– Integrated MOSFETs, inductor, and controller

– Wide input voltage range of 3 V to 36 V

– Adjustable output voltage from 1 V to 6 V with

1% setpoint accuracy over temperature

– 4-mm × 6-mm × 1.8-mm overmolded package

– –40°C to 125°C junction temperature range

– Frequency adjustable from 200 kHz to 2.2 MHz

– Negative output voltage capability

• Ultra-high efficiency across the full load range

– 93% peak efficiency at 12 VIN, 5 VOUT,1 MHz

– External bias option for improved efficiency

– Shutdown quiescent current of 0.6 µA (typical)

– 0.4-V typical dropout voltage at 3-A load

• Ultra-low conducted and radiated EMI signatures

– Low-noise package with dual input paths and

integrated capacitors reduces switch ringing

– Constant-frequency FPWM mode of operation

– Meets CISPR 11 and 32 class B emissions

• Suitable for scalable power supplies

– Pin compatible with the TLVM13620 (36 V, 2 A)

• Inherent protection features for robust design

– Precision enable input and open-drain PGOOD

indicator for sequencing, control, and VIN UVLO

– Hiccup-mode overcurrent protection

– Thermal shutdown protection with hysteresis

• Create a custom design using the TLVM13630 with

the WEBENCH® Power Designer

2 Applications

• Test and measurement, aerospace and defense

• Factory automation and control

• Buck and inverting buck-boost power supplies

3 Description

The TLVM13630 synchronous buck power module

is a highly integrated 36-V, 3-A DC/DC solution that

combines power MOSFETs, a shielded inductor, and

passives in an Enhanced HotRod™ QFN package.

The module has pins for VIN and VOUT located at the

corners of the package for optimized input and output

capacitor layout placement. Four larger thermal pads

beneath the module enable a simple layout and easy

handling in manufacturing.

With an output voltage range from 1 V to 6 V,

the TLVM13630 is designed to quickly and easily

implement a low-EMI design in a small PCB footprint.

The total solution requires as few as four external

components and eliminates the magnetics and

compensation part selection from the design process.

Although designed for small size and simplicity

in space-constrained applications, the TLVM13630

module offers many features for robust performance:

precision enable with hysteresis for adjustable input-

voltage UVLO, integrated VCC, bootstrap and input

capacitors for increased reliability and higher density,

constant switching frequency over the full load current

range for enhanced load transient performance,

negative output voltage capability for inverting

applications, and a PGOOD indicator for sequencing,

fault protection, and output voltage monitoring.

Device Information

PART NUMBER(1)

PACKAGE

BODY SIZE (NOM)

TLVM13630

B0QFN (30)

4.0 mm × 6.0 mm

(1)

For all available packages, see the orderable addendum at

the end of the data sheet.

space

PG

EN

RT

PGND

AGND

VOUT

FB

VLDOIN

VIN

COUT

RFBB

TLVM13630

RRT

IOUT(max) = 3 A

VIN = 3 V...36 V

VCC

VOUT = 5 V

CIN

RFBT

* VOUT enters dropout

if VIN < 5.4 V

CVCC

Typical Schematic

Output Current (A)

0.0

0.5

1.0

1.5

2.0

2.5

3.0

50

55

60

65

70

75

80

85

90

95

100

VOUT = 5 V

fSW = 1 MHz

VIN = 12 V

VIN = 24 V

VIN = 36 V

Typical Efficiency, VOUT = 5 V, FSW = 1 MHz

TLVM13630

SLVSFT6B – MAY 2021 – REVISED JANUARY 2022

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.