ABSOLUTE MAXIMUM RATINGS

RECOMMENDED OPERATING CONDITIONS

CDCE421A

www.ti.com..................................................................................................................................................................................................... SCAS873 – APRIL 2009

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

AVAILABLE OPTIONS(1)

TA

PACKAGED DEVICES

FEATURES

CDCE421ARGET

24-pin QFN (RGE) package, small tape and reel

–40°C to +85°C

CDCE421ARGER

24-pin QFN (RGE) package, tape and reel

(1)

For the most current specifications and package information, see the Package Option Addendum located at the end of this data sheet or

refer to our web site at www.ti.com.

Over operating free-air temperature range (unless otherwise noted).

(1)

CDCE421A

UNIT

VDD

Supply voltage(2)

–0.5 to 4.6

V

VI

Voltage range for all other input pins(2)

–0.5 to VCC to +0.5

V

IO

Output current for LVPECL

–50

mA

ESD

Electrostatic discharge (HBM)

2

kV

TA

Specified free-air temperature range (no airflow)

–40 to +85

°C

TJ

Maximum junction temperature

+125

°C

TSTG

Storage temperature range

–65 to +150

°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

condition is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values are with respect to network ground terminal.

Over operating free-air temperature range (unless otherwise noted).

MIN

NOM

MAX

UNIT

VDD

Supply voltage

3.0

3.30

3.60

V

TA

Ambient temperature (no airflow, no heatsink)

–40

+85

°C

Copyright © 2009, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Link(s): CDCE421A