| поискавой системы для электроныых деталей |
|
MB89R112 датащи(PDF) 22 Page - RAMXEED LIMITED |
|
|
|||||||||||||||||||||||||||||
MB89R112 датащи(HTML) 22 Page - RAMXEED LIMITED |
|
22 / 49 page ![]() MB89R112 22 DS411-00004-3v0-E 1. Description of Mandatory Commands 1-1. Inventory command The Inventory command executes the anti-collision sequence. If an error is detected during execution of this command, a response indicating the error shall not be returned. The Inventory_flag (bit 3) must be set to “1”. When the AFI_flag (bit 5) in the Inventory command frame is set as “1”, the response shall be returned in the following cases. • The AFI value of the transponder is in accord with the optional AFI value. • The 4 bits value MSB of the Optional AFI is “0H”, and the 4 bits value LSB of the Optional AFI is in accord with the 4 bits value LSB of the transponder. • The 4 bits value LSB of the Optional AFI is “0H”, and the 4 bits value MSB of the Optional AFI is in accord with the 4 bits value MSB of the transponder. • The optional AFI value is “00H”. Request [Request from the reader/writer to the transponder] Response [Response from the transponder to the reader/writer] 1-2. Stay Quiet command On receiving the Stay Quiet command, the transponder enters the quiet state. The transponder does not return any responses, including an error indication. In the quiet state, the transponder does not execute any request for which the Inventory_flag (bit 3) is set to “1” and executes only a command for which the Address_flag (bit 6) is set to “1”. The transponder exits the quiet state only in the following cases: • The transponder enters the power-off state. • The transponder receives the Select command and enters the select state. • The transponder receives the Reset to Ready command and enters the ready state. Request [Request from the reader/writer to the transponder] Response [Response from the transponder to the reader/writer] No response SOF Flag Command (Inventory) Optional AFI Mask length Mask value CRC EOF 8 bits 8 bits (“01H”) 8 bits 8 bits 0 to 64 bits 16 bits SOF Flag DSFID UID CRC EOF 8 bits (“00H”) 8 bits 64 bits 16 bits SOF Flag Command (Stay Quiet) UID (necessary) CRC EOF 8 bits 8 bits (“02H”) 64 bits 16 bits |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |