| поискавой системы для электроныых деталей |
|
S29GL01GS датащи(PDF) 39 Page - Cypress Semiconductor |
|
|
|||||||||||||||||||||||||||||
S29GL01GS датащи(HTML) 39 Page - Cypress Semiconductor |
|
39 / 108 page ![]() Document Number: 001-98285 Rev. *R Page 39 of 108 S29GL01GS/S29GL512S S29GL256S/S29GL128S 5.5.2.7 DQ1: Write-to-Buffer Abort DQ1 indicates whether a Write-to-Buffer operation was aborted. Under these conditions DQ1 produces a 1. The system must issue the Write-to-Buffer-Abort-Reset command sequence to return the EAC to standby (Read Mode) and the Status Register failed bits are cleared. See Write Buffer Programming on page 24 for more details. Notes: 1. DQ5 switches to '1' when an Embedded Program or Embedded Erase operation has exceeded the maximum timing limits. See DQ5: Exceeded Timing Limits on page 38 for more information. 2. DQ7 and DQ2 require a valid address when reading status information. Refer to the appropriate subsection for further details. 3. Data are invalid for addresses in a Program Suspended Line. All addresses other than the program suspended line can be read for valid data. 4. DQ1 indicates the Write-to-Buffer ABORT status during Write-Buffer-Programming operations. 5. Applies only to program operations. Table 5.3 Data Polling Status Operation DQ7 (Note 2) DQ6 DQ5 (Note 1) DQ3 DQ2 (Note 2) DQ1 (Note 4) RY/BY# Standard Mode Embedded Program Algorithm DQ7# Toggle 0 N/A No Toggle 00 Reading within Erasing Sector 0 Toggle 0 1 Toggle N/A 0 Reading Outside erasing Sector 0 Toggle 0 1 No Toggle N/A 0 Program Suspend Mode (Note 3) Reading within Program Suspended Sector INVALID (Not Allowed) INVALID (Not Allowed) INVALID (Not Allowed) INVALID (Not Allowed) INVALID (Not Allowed) INVALID (Not Allowed) 1 Reading within Non-Program Suspended Sector Data Data Data Data Data Data 1 Erase Suspend Mode Reading within Erase Suspended Sector 1 No Toggle 0 N/A Toggle N/A 1 Reading within Non-Erase Suspend Sector Data Data Data Data Data Data 1 Programming within Non-Erase Suspended Sector DQ7# Toggle 0 N/A N/A N/A 0 Write-to- Buffer (Notes 4, 5) BUSY State DQ7# Toggle 0 N/A No Toggle 00 Exceeded Timing Limits DQ7# Toggle 1 N/A N/A 0 0 ABORT State DQ7# Toggle 0 N/A N/A 1 0 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |