LPC2292 datasheet(1/54 Pages) PHILIPS

номер детали	LPC2292

подробное описание детали	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface

PDF	54 Pages

Scroll/Zoom	100%

производитель	PHILIPS [NXP Semiconductors]

домашняя страница	http://www.nxp.com

Logo

1 / 54 page

1.

General description

The LPC2292/2294 microcontrollers are based on a 16/32-bit ARM7TDMI-S CPU with

real-time emulation and embedded trace support, together with 256 kB of embedded

high-speed ﬂash memory. A 128-bit wide memory interface and a unique accelerator

architecture enable 32-bit code execution at the maximum clock rate. For critical code size

applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with

minimal performance penalty.

With their 144-pin package, low power consumption, various 32-bit timers, 8-channel

10-bit ADC, 2/4 (LPC2294) advanced CAN channels, PWM channels and up to nine

external interrupt pins these microcontrollers are particularly suitable for automotive and

industrial control applications as well as medical systems and fault-tolerant maintenance

buses. The number of available fast GPIOs ranges from 76 (with external memory)

through 112 (single-chip). With a wide range of additional serial communications

interfaces, they are also suited for communication gateways and protocol converters as

well as many other general-purpose applications.

Remark: Throughout the data sheet, the term LPC2292/2294 will apply to devices with

and without the /00 or /01 sufﬁx. The sufﬁxes /00 and /01 will be used to differentiate from

other devices only when necessary.

2.

Features

2.1 Key features brought by LPC2292/2294/01 devices

I Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original device.

They also allow for a port pin to be read at any time regardless of its function.

I Dedicated result registers for ADC(s) reduce interrupt overhead. The ADC pads are

5 V tolerant when conﬁgured for digital I/O function(s).

I UART0/1 include fractional baud rate generator, auto-bauding capabilities and

handshake ﬂow-control fully implemented in hardware.

I Buffered SSP serial controller supporting SPI, 4-wire SSI, and Microwire formats.

I SPI programmable data length and master mode enhancement.

I Diversiﬁed Code Read Protection (CRP) enables different security levels to be

implemented. This feature is available in LPC2292/2294/00 devices as well.

I General purpose timers can operate as external event counters.

2.2 Key features common for all devices

I 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 package.

LPC2292/2294

16/32-bit ARM microcontrollers; 256 kB ISP/IAP ﬂash with

CAN, 10-bit ADC and external memory interface

Rev. 06 — 10 December 2007

Product data sheet

Аналогичный номер детали - LPC2292

производитель	номер детали	датащи	подробное описание детали
NXP Semiconductors	LPC2292	188Kb / 40P	16/32-bit ARM microcontrollers 256 kB ISP/IAP Flash with CAN, 10-bit ADC and external memory interface Rev. 01-05 February 2004
	LPC2292	279Kb / 53P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 7-4 December 2008
	LPC2292FBD144	188Kb / 40P	16/32-bit ARM microcontrollers 256 kB ISP/IAP Flash with CAN, 10-bit ADC and external memory interface Rev. 01-05 February 2004
	LPC2292FBD144	279Kb / 53P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 7-4 December 2008
	LPC2292FBD144/00	279Kb / 53P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 7-4 December 2008

More results

Аналогичное описание - LPC2292

производитель	номер детали	датащи	подробное описание детали
NXP Semiconductors	LPC2194	158Kb / 33P	Single-chip 16/32-bit microcontrollers 256 kB ISP/IAP Flash with 10-bit ADC and CAN Rev. 01-06 February 2004
	LPC2292	188Kb / 40P	16/32-bit ARM microcontrollers 256 kB ISP/IAP Flash with CAN, 10-bit ADC and external memory interface Rev. 01-05 February 2004
	LPC2119	163Kb / 34P	Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC and CAN Rev. 03-22 December 2004
	LPC2212	185Kb / 40P	16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC and external memory interface Rev. 02-23 December 2004
	LPC2212	196Kb / 45P	16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC and external memory interface Rev. 04-3 January 2008
	LPC2292	279Kb / 53P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 7-4 December 2008
	LPC2212	208Kb / 45P	16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC and external memory interface Rev. 04-3 January 2008
	LPC2212	359Kb / 47P	Single-chip 16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC Rev. 5-14 June 2011
	LPC2212	359Kb / 47P	Single-chip 16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC and external memory interface Rev. 5-14 June 2011
	LPC2292	456Kb / 54P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 8-8 June 2011

More results

LPC2292 датащи(PDF) 1 Page - NXP Semiconductors

LPC2292 датащи(HTML) 1 Page - NXP Semiconductors

Аналогичный номер детали - LPC2292

Аналогичное описание - LPC2292

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

датащи скачать

ссылки URL