C8051F360 datasheet(23/288 Pages) SILABS

23 / 288 page

Rev. 1.0

C8051F360/1/2/3/4/5/6/7/8/9

1.1.3. Additional Features

The C8051F36x SoC family includes several key enhancements to the CIP-51 core and peripherals to

improve performance and ease of use in end applications.

The extended interrupt handler provides 16 interrupt sources into the CIP-51 (as opposed to 7 for the stan-

dard 8051), allowing numerous analog and digital peripherals to interrupt the controller. An interrupt driven

system requires less intervention by the MCU, giving it more effective throughput. The extra interrupt

sources are very useful when building multi-tasking, real-time systems.

Eight reset sources are available: power-on reset circuitry (POR), an on-chip VDD Monitor (forces reset

when power supply voltage drops below VRST as given in Table 12.1 on page 134), a Watchdog Timer, a

Missing Clock Detector, a voltage level detection from Comparator0, a forced software reset, an external

reset pin, and an illegal Flash access protection circuit. Each reset source except for the POR, Reset Input

Pin, or Flash error may be disabled by the user in software. The WDT may be permanently enabled in soft-

ware after a power-on reset during MCU initialization.

The internal oscillator factory calibrated to 24.5 MHz ±2%. This internal oscillator period may be user pro-

grammed in ~0.5% increments. An additional low-frequency oscillator is also available which facilitates

low-power operation. An external oscillator drive circuit is included, allowing an external crystal, ceramic

resonator, capacitor, RC, or CMOS clock source to generate the system clock. If desired, the system clock

source may be switched on-the-fly between both internal and external oscillator circuits. An external oscil-

lator can also be extremely useful in low power applications, allowing the MCU to run from a slow (power

saving) source, while periodically switching to the fast (up to 25 MHz) internal oscillator as needed. Addi-

tionally, an on-chip PLL is provided to achieve higher system clock speeds for increased throughput.

PCA

WDT

Missing

Clock

Detector

(one-

shot)

(Software Reset)

System Reset

Reset

Funnel

Px.x

SWRSF

System

Clock

CIP-51

Microcontroller

Core

Extended Interrupt

Handler

Clock Select

Errant

FLASH

Operation

/RST

(wired-OR)

Power On

Reset

'0'

Comparator 0

C0RSEF

VDD

Supply

Monitor

Enable

XTAL1

XTAL2

External

Oscillator

Drive

Low

Frequency

Oscillator

Internal

Oscillator

PLL

Circuitry

Figure 1.5. On-Chip Clock and Reset

C8051F360 датащи(PDF) 23 Page - Silicon Laboratories

C8051F360 датащи(HTML) 23 Page - Silicon Laboratories

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL