XRT83SL314 datasheet(2/83 Pages) EXAR

2 / 83 page

XRT83SL314

REV. 1.0.1

14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT

FEATURES

• Fully integrated 14-Channel short haul transceivers

for

T1/J1

(1.544MHz)

and

(2.048MHz)

applications.

• T1/E1/J1 short haul and clock rate are per port

selectable

through

software

without

changing

components.

• Internal Impedance matching on both receive and

transmit for 75

Ω (E1), 100Ω (T1), 110Ω (J1), and

120

Ω (E1) applications are per port selectable

through software without changing components.

• Power down on a per channel basis with

independent receive and transmit selection.

• Five pre-programmed transmit pulse settings for T1

short haul applications.

• Arbitrary Pulse Generators for both T1 and E1

modes.

• On-Chip transmit short-circuit protection and

limiting protects line drivers from damage on a per

channel basis.

• Independent Crystal-Less digital jitter attenuators

(JA) with 32-Bit or 64-Bit FIFO for the receive and

transmit paths

• On-Chip frequency multiplier generates T1 or E1

master clocks from a variety of external clock

sources (8, 16, 56, 64, 128, 256kHz and 1X, 2X,

4X, 8X T1 or E1)

• Driver failure monitor output (DMO) alerts of

possible system or external component problems.

• Transmit outputs and receive inputs may be "High"

impedance

for

protection

redundancy

applications on a per channel basis.

• Support for automatic protection switching.

• 1:1 and 1+1 protection without relays.

• Receive monitor mode handles 0 to 29dB resistive

attenuation (flat loss) along with 0 to 6dB cable loss

for both T1 and E1.

• Receiver line attenuation indication output in 1dB

steps.

• Loss of signal (RLOS) according to ITU-T G.775/

ETS300233 (E1) and ANSI T1.403 (T1/J1).

• Programmable receive slicer threshold (45%, 50%,

55%, or 68%) for improved receiver interference

immunity.

• Programmable data stream muting upon RLOS

detection.

• On-Chip HDB3/B8ZS encoder/decoder with an

internal 16-bit LCV counter for each channel.

• On-Chip digital clock recovery circuit for high input

jitter tolerance.

• QRSS pattern generator and detection for testing

and monitoring.

• Error and bipolar violation insertion and detection.

• Transmit all ones (TAOS) and in-band network loop

up and loop down code generation.

• Automatic loop code detection for remote loopback

activation.

• Supports local analog, remote, digital, and dual

loopback modes.

• Low Power dissipation: 170mW per channel (50%

density).

• 250mW per channel maximum power dissipation

(100% density).

• Single 3.3V supply operation (3V to 5V I/O

tolerant).

• 304-Pin TBGA package

• -40°C to +85°C Temperature Range

• Supports gapped clocks for mapper/multiplexer

applications.

PRODUCT ORDERING INFORMATION

PRODUCT NUMBER

PACKAGE TYPE

OPERATING TEMPERATURE RANGE

XRT83SL314IB

304 Lead TBGA

-40°C to +85°C

XRT83SL314 датащи(PDF) 2 Page - Exar Corporation

XRT83SL314 датащи(HTML) 2 Page - Exar Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83

датащи скачать

ссылки URL