DSP56367 datasheet(11/100 Pages) FREESCALE

11 / 100 page

Interrupt and Mode Control

DSP56367 Technical Data, Rev. 2.1

Freescale Semiconductor

2-7

Table 2-8 Interrupt and Mode Control

Signal Name

Type

State During

Reset

Signal Description

MODA/IRQA

Input

Mode Select A/External Interrupt Request A—MODA/IRQA is an active-low

Schmitt-trigger input, internally synchronized to the DSP clock. MODA/IRQA selects

the initial chip operating mode during hardware reset and becomes a level-sensitive or

negative-edge-triggered, maskable interrupt request input during normal instruction

processing. MODA, MODB, MODC, and MODD select one of 16 initial chip operating

modes, latched into the OMR when the RESET signal is deasserted. If the processor

is in the stop standby state and the MODA/IRQA pin is pulled to GND, the processor

will exit the stop state.

This input is 3.3V tolerant.

MODB/IRQB

Input

Mode Select B/External Interrupt Request B—MODB/IRQB is an active-low

Schmitt-trigger input, internally synchronized to the DSP clock. MODB/IRQB selects

the initial chip operating mode during hardware reset and becomes a level-sensitive or

negative-edge-triggered, maskable interrupt request input during normal instruction

processing. MODA, MODB, MODC, and MODD select one of 16 initial chip operating

modes, latched into OMR when the RESET signal is deasserted.

This input is 3.3V tolerant.

MODC/IRQC

Input

Mode Select C/External Interrupt Request C—MODC/IRQC is an active-low

Schmitt-trigger input, internally synchronized to the DSP clock. MODC/IRQC selects

the initial chip operating mode during hardware reset and becomes a level-sensitive or

negative-edge-triggered, maskable interrupt request input during normal instruction

processing. MODA, MODB, MODC, and MODD select one of 16 initial chip operating

modes, latched into OMR when the RESET signal is deasserted.

This input is 3.3V tolerant.

MODD/IRQD

Input

Mode Select D/External Interrupt Request D—MODD/IRQD is an active-low

Schmitt-trigger input, internally synchronized to the DSP clock. MODD/IRQD selects

the initial chip operating mode during hardware reset and becomes a level-sensitive or

negative-edge-triggered, maskable interrupt request input during normal instruction

processing. MODA, MODB, MODC, and MODD select one of 16 initial chip operating

modes, latched into OMR when the RESET signal is deasserted.

This input is 3.3V tolerant.

RESET

Input

Reset—RESET is an active-low, Schmitt-trigger input. When asserted, the chip is

placed in the Reset state and the internal phase generator is reset. The Schmitt-trigger

input allows a slowly rising input (such as a capacitor charging) to reset the chip reliably.

When the RESET signal is deasserted, the initial chip operating mode is latched from

the MODA, MODB, MODC, and MODD inputs. The RESET signal must be asserted

during power up. A stable EXTAL signal must be supplied while RESET is being

asserted.

This input is 3.3V tolerant.

DSP56367 датащи(PDF) 11 Page - Freescale Semiconductor, Inc

DSP56367 датащи(HTML) 11 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

датащи скачать

ссылки URL