DSP56367 datasheet(28/100 Pages) FREESCALE

28 / 100 page

AC Electrical Characteristics

DSP56367 Technical Data, Rev. 2.1

3-4

Freescale Semiconductor

3.5

AC Electrical Characteristics

The timing waveforms shown in the AC electrical characteristics section are tested with a VIL maximum

of 0.4 V and a VIH minimum of 2.4 V for all pins except EXTAL. AC timing specifications, which are

referenced to a device input signal, are measured in production with respect to the 50% point of the

respective input signal’s transition. DSP56367 output levels are measured with the production test machine

VOL and VOH reference levels set at 0.4 V and 2.4 V, respectively.

NOTE

Although the minimum value for the frequency of EXTAL is 0 MHz, the

device AC test conditions are 15 MHz and rated speed.

3.6

Internal Clocks

3 This characteristic does not apply to PCAP.

4 The Appendix A, "Power Consumption Benchmark" section provides a formula to compute the estimated current

requirements in Normal mode. In order to obtain these results, all inputs must be terminated (i.e., not allowed to float).

Measurements are based on synthetic intensive DSP benchmarks. The power consumption numbers in this specification are

90% of the measured results of this benchmark. This reflects typical DSP applications. Typical internal supply current is

measured with VCCQL = 1.8V, VCC(other) = 3.3V at TJ = 25°C. Maximum internal supply current is measured with VCCQL = 1.89V,

VCC(other) = 3.46V at TJ = 95°C.

5 In order to obtain these results, all inputs, which are not disconnected at Stop mode, must be terminated (i.e., not allowed to

float).

6 Periodically sampled and not 100% tested

Table 3-4 Internal Clocks

Characteristics

Symbol

Expression1, 2

Min

Typ

Max

Internal operation frequency with PLL enabled

—

(Ef

× MF)/(PDF × DF)

—

Internal operation frequency with PLL disabled

—

Ef/2

—

Internal clock high period

• With PLL disabled

• With PLL enabled and MF

≤ 4

• With PLL enabled and MF > 4

—

0.49

× ETC × PDF ×

DF/MF

0.47

× ETC × PDF ×

DF/MF

ETC

—

0.51

× ETC × PDF ×

DF/MF

0.53

× ETC × PDF ×

DF/MF

Internal clock low period

• With PLL disabled

• With PLL enabled and MF

≤ 4

• With PLL enabled and MF > 4

—

0.49

× ETC × PDF ×

DF/MF

0.47

× ETC × PDF ×

DF/MF

ETC

—

0.51

× ETC × PDF ×

DF/MF

0.53

× ETC × PDF ×

DF/MF

Internal clock cycle time with PLL enabled

—ETC × PDF × DF/MF

—

DSP56367 датащи(PDF) 28 Page - Freescale Semiconductor, Inc

DSP56367 датащи(HTML) 28 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

датащи скачать

ссылки URL